background image

EN

EN

Please read this manual carefully before using.
Please keep it properly for further reference.

Table of Contents

Introduction ...................................................................................................................1-4

Foreword ............................................................................................................................1
Package List .......................................................................................................................2
Product Overview ........................................................................................................3-4

Preparation before Use ..............................................................................................4-8

Power on ............................................................................................................................4
Connect Keypad to Control Panel ...............................................................................5
Connect RFID Tag to Keypad ........................................................................................6
Connect Electronic Door Lock ......................................................................................8
Installation ..........................................................................................................................8

Settings ........................................................................................................................ 9-20

Enter Setup State .............................................................................................................9
Exit Delay .........................................................................................................................10
Setting for SOS Key .......................................................................................................11
Keyboard Tone ................................................................................................................13
RFID Reader Setting ......................................................................................................14
Direct Disarm by RFID Tag ...........................................................................................16
Change User Code ........................................................................................................18
Change Admin Code ....................................................................................................19
Reset .................................................................................................................................20

Usage ......................................................................................................................... 20-24

Arm....................................................................................................................................21
Disarm ..............................................................................................................................21
Stay Mode .......................................................................................................................23
Emergency Call ...............................................................................................................23
Mute Mode .....................................................................................................................24

Notices and Maintenance ..................................................................................... 25-26

Usage Notices .................................................................................................................25
Maintenance ...................................................................................................................26

FAQ ............................................................................................................................. 27-28
Instructions of Wired Cables Interface ......................................................................29
Specifications ..................................................................................................................29

Summary of Contents for WK7000

















Reviews: