background image

SM CV650 Illuminated Trolley Mirror User Guide 

 
 

 

 

 
Congratulations on purchasing the CV650 Trolley Mirror, which is designed to offer you years of reliable, operational service.  
 
 
The high performance, energy efficient, multi COB LED Light Bar, delivers up to 650 lumens @ 0.5 metres, ensuring maximum 
illumination of those hard to access areas, but the unit can of course also be used without switching the Light Bar on.  

 

This rugged unit combines reliable high-quality performance and operator convenience, to minimise user fatigue, even during 
lengthy periods of continuous operation.  

 

For long term investment protection, most major components are available to purchase as spares and are designed to 
facilitate quick and easy user installation in the field with standard hand tools (spanner and screwdriver type).  

 

 

Side View 

 

with a maximum height of just 95mm, the ultra-low profile of the unit 

ensures its practical and effective use, even under low vehicles or structures

 

 

 
  
 

Top View 

 

Underside View

 

 

 
 

Summary of Contents for CV650

Page 1: ...ng the Light Bar on This rugged unit combines reliable high quality performance and operator convenience to minimise user fatigue even during lengthy periods of continuous operation For long term investment protection most major components are available to purchase as spares and are designed to facilitate quick and easy user installation in the field with standard hand tools spanner and screwdrive...

Page 2: ...o Lithium Polymer battery is supplied partially charged and it is recommended that it be fully charged before being put to initial operational use It can be recharged at any time or at any battery status level using the TRACER mains charger unit supplied which should take less than 2 5 hours even where a full recharge is needed As with all rechargeable batteries the battery will ultimately require...

Page 3: ...ction is still fully connected i e has not been disturbed while removing the battery box see fig 1 then reposition the box over the studs on the underside of the unit 7 Check that the cable with the in line connector is positioned in the space behind the battery in the battery box see fig 1 below then drop the box onto the studs and resecure in position with new M5 Nyloc Nuts note Nyloc Nuts are d...

Page 4: ...NG Use only the Tracer Rapid Charger to recharge the battery The use of alternative battery chargers could damage the Tracer Battery 3 Battery not holding charge If the battery charges but discharges quickly it indicates that the battery has reached the end of its useful life and needs replacing 4 Handle has become loose Tighten the nut bolt securing the Handle Assembly to the Base Tray 5 Lost nut...

Reviews: