Sirman Ciclone W 200 Instructions For Use And Maintenance Manual Download | Manualshive

Page: 1 / 14

background image

28

CHAP. 8 - DISPOSAL OF THE MACHINE

8.1 - DISINSTALLATION

If it has been decided to disinstall the machine for some reason, ensure that the
machine is unusable by anyone:

detach and cut electrical connections.

8.2 - WEEE Waste of Electric and Electronic Equipment

Directive 2002/95/EC, 2002/96/EC and 2003/108/EC on the restriction of the
use of certain hazardous substances in electrical and electronic
equipment, and waste electrical and electronic equipment

This symbol, crossed out wheelie bin, on the product or on its packaging indicates that
this product must not be disposed of with your other household waste.

Separate waste collection of this appliance is organised and managed by the
manufacturer. It is the user’s responsibility to contact the manufacturer and follow the
waste treatment system the manufacturer has adopted for separate waste collection.

The separate collection and recycling of your waste equipment at the time of disposal
will help to conserve natural resources and ensure that it is recycled in a manner that
protects human health and the environment.

SERVICE CENTRE

AUTHORISED DEALER

1

Professional Hand-Held Mixer

W 200-280-360

Regular,

Speed variator,

Instructions for use and maintenance

Ed. 07/2014

1
2
3
...
»

Summary of Contents for Ciclone W 200















Reviews:

No comments

Related manuals for Ciclone W 200

Brand: Mutable Instruments Pages: 3

Brand: Klutch Pages: 18

MixWizard WZ3 20S

Brand: ALLEN & HEATH Pages: 32

Brand: MQ Multiquip Pages: 2

Brand: Shure Pages: 10

Brand: Kogan Pages: 8

Brand: AEG Pages: 36

Brand: AEG Pages: 48

EASYCOMPACT STM5200

Brand: AEG Pages: 24

PREMIUMLINE 7 Series

Brand: AEG Pages: 24

Brand: Samson Pages: 12

Brand: API Pages: 10

Brand: PROEL Pages: 4

Brand: SoundCraft Pages: 12

Brand: SoundCraft Pages: 41

Brand: Arnica Pages: 10

Brand: Taurus Pages: 40

Brand: Rane Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands