Quick start guide
KF3A-2219-EU-GFOB
Emergency person to person keyfob with shock detection
Any questions? Call us on 01246 450789
TM
Silent
Alert
Standard Activation
1.
1 2 3 4 5 6 7 8
Status light
Send button
Configuration
switches
Battery
Security screw
Battery cover
Neck cord
1 2 3 4 5 6 7 8
A battery is already installed in the Keyfob.
Remove and
Discard
To activate the unit
simply remove the paper
tab by pulling it gently
away from the unit.
The keyfob is now ready
to go and is set to
illuminate person to
person by default.
2.
Sending a signal
The supplied lithium battery
should provide a large number
of activations
Press the send button.
The status light will shine green
and the Pager or SignWave
should receive a person to
person signal.
If the light shines orange when
the button is pressed the internal
battery is low and should be
replaced (see step 3).
3.
Low battery
When the battery needs replacing
remove the screw from the rear of
the unit.
Turn the unit over and gently push
the battery cover upwards
exposing the battery and
configuration switches.
Replace with a 6V lithium battery
(2CR1/3N OR PX28L)
1 2 3 4 5 6 7 8
Unscrew here
CCF3A
-2219
-EU-
GFOB
ALAR
M
05/02/2014 BA
TTER
Y
TYP
E
6 VOL
T
LITHIUM
2CR1/3N
or PX28L
Silen
t Aler
t Care Cal
l System
www
.silent-al
ert.co.uk Clofiel
d Ltd. UK
Tel: 01246
-2600
45
KF3A-2219-EU-GFOB
Shock detection activation
The KF3A-2219-EU-GFOB
variant incorporates a
sensor which will trigger the unit automatically when the device
receives a shock.
For best results we recommend the using the neck
cord provided to allow the keyfob to hang around the
neck. Placing the keyfob in a pocket may reduce the
effectiveness of the shock sensor.
WARNING! Your device and its accessories are not toys. They may contain small parts. Keep them out of the reach of small children.
