![background image](http://html.mh-extra.com/html/silca/air4q/air4q_quick-start-manual_1270937001.webp)
Copyright by Silca S.p.A. - All Rights Reserved
COPY FIXED CODE REMOTES
with AIR4 Q
1
PLACE THE REMOTE CONTROL TO BE CLONED PERPENDICULARLY, IN THE LOWER LEFT SIDE OF THE AIR4
2
PRESS
BUTTON 1
ON THE AIR4
REMOTE CONTROL
3
AT THE SAME TIME PRESS
BUTTON 4
FOUR TIMES
4
RELEASE BOTH BUTTONS
5
AIR4 REMOTE CONTROL LED WILL
START FLASHING BRIEFLY ABOUT
EVERY 2 SEC.
6
PRESS AND HOLD DOWN THE BUTTON TO BE COPIED
FROM THE ORIGINAL REMOTE CONTROL AND WAIT
FOR THE AIR4 LED TO START FLASHING RAPIDLY,
WHICH CONFIRMS ACQUISITION OF THE CODE.
RELEASE THE BUTTON
7
PRESS THE AIR4 REMOTE CONTROL BUTTON TO BE
MEMORIZED. WAIT FOR THE LED TO GO OUT