Quick Start
Sigfox Access Station Micro SMBS-T4
+33 (0)5 82 08 07 10
Bâtiment E-volution
425, rue Jean Rostand
31670 Labège – France
sigfox.com
The information presented is subject to change without notice. Sigfox assumes no responsibility
for inaccuracies contained herein. Sigfox and the Sigfox logo are trademarks of Sigfox. All other
trademarks are the property of their respective owners. Copyright ©2018 Sigfox. All right reserved.
August 2018
Step 4 Activation / configuration
The activation of the station on the cloud (referred as commissioning)
is done by the local Sigfox Operator.
If the station has been registered, the station is ready and operational
as soon as the boot up is done and the LED is solid green.
of your station
Thank you for choosing the Sigfox Access Station
Micro.
For more detailed information, product updates and
online manuals please check
micro.sigfox.com
.
For support, contact your local Sigfox Operator or
distributor.
1 minute
Light is
Meaning
Then ...
Off
No power
Your Access Station Micro is not
powered. Please check the PoE power
supply is firmly attached.
Red (for a few secs) Power on
Your Access Station Micro is powering on.
Green – Flashing
Booting up (20 – 60 sec)
If flashing continue for more than 1
minute contact your support.
Green – Solid
In Operation
Your Access Station Micro is up and
running.
Orange – Flashing
No connectivity
The Ethernet cable or USB dongle may
be disconnected. Make sure that the
cable or dongle is firmly attached.
Orange – Solid
No VPN connection
Your Access Station Micro may not
be registered correctly. Contact your
support.
Purple – Solid
Warming up (temp < 0°)
Cooling down (temp > 55°C)
External temperature is too extreme.
While your station is in cooling/warming
mode, it is not in service.
Red – Solid
No Boot
If the light remains red after 1 minute
your Access Station Micro may need
replacement.
Contact the support at your point of
purchase.
Check with your local Sigfox Operator for activation or if any change in the
configuration is required.
