Symbole
Burner active
Economy
setpoint
1 heating
period
“Time” menu
Error message
Setpoint frost
protection
2 heating
period
T
“Temperature”
menu
Automatic
operation
Setpoint remote
operation
3 heating
period
“Heating
periods” menu
Continuously
comfort mode
Absence
setpoint
Current weekday
“Absence”
menu
Continuously
economy mode
Actual room-
temperature
Workingday group
Battery
change
Frost
protection
Actual outside
temperature (*)
Weekend group
Commissioning and quick start
Remote
operation
24-hour mode
Hot water temp.
setpoint (*)
Entire week
Absence
Comfort
setpoint
Actual boiler
water temp. (*)
Time schedule
(*) Display only possible if these values are delivered by the boiler.
Functions of the roller selector
1. Remove controller from its base and open
cover of the battery compartment.
2. Remove the black battery transit tab.
The controller will switch itself on.
3. Close the battery compartment and replace
the controller.
4. Switch on the boiler.
CLICK
Press:
•
You access the menu
level
•
You activate the menu
•
You save the inputs
•
You switch to the next
menu
item
•
You accept the menu
item
+
Roll:
•
You go from one menu to the next
•
You change the setting variables
(temperature in increments of
0.2 °C, time in increments of
hours and minutes)
•
You select predefined functions
Selecting the operating mode
Escape button
Press the Esc button to return to the menu level previously activated or to
leave the menu level in a number of steps until you reach the initial display
(the settings currently displayed will be accepted).
Setting the time of day and the weekday
The operating mode selector enables you
to select 5 different operating modes:
•
Automatic operation with a maximum of
3 heating periods
•
Continuously comfort mode
•
Continuously economy mode
•
Continuously frost protection mode
•
24-hour mode with current comfort setpoint
Changing temporarily the current
setpoint temperature
CLICK
Ö
h
Ö
h
Ö
Ö
Ö
If no button is pressed for 20 seconds, the setting
displayed will be accepted and the initial display will
appear again.
1. Press: You access the menu level;
the
clock
flashes.
2. Press: You accept the menu;
the
hours
flash.
3. Roll:
Set the current
hour
.
4. Press: You save the input;
the
minutes
flash.
5. Roll:
Set the current
minute
.
6. Press: You save the input;
the
weekday
flashes.
7. Roll:
Select the current
weekday
.
8. Press the Esc button to return to the menu level:
the T menu flashes
(change not necessarily required; press
the Esc button again to return to the
initial
display).
° C
Changing temperatures long-term
The change is
maintained until
the next switching
point is reached!
1.
When pressing the
or
button for the
first time, the currently valid setpoint temperature
will be displayed. It can be readjusted in
increments of 0.2 °C (max. +/-4 °C).
2.
After 3 seconds, the initial display will
automatically appear again.
Changing temporarily the
temperature setpoint (savings tip)
CLICK
Ö
Ö
Ö
° C
Ö
Ö
° C
Ö
Ö
° C
Ö
Ö
° C
Ö
Ö
If no button is pressed for 20 seconds, the setting
displayed will be accepted and the initial display will
appear again.
1. Press: You access the menu level;
the
clock
flashes.
2. Roll: Toward the display to the
T
menu.
3. Press: You accept the menu;
symbol
flashes.
4. Press: You accept
;
the
setpoint
flashes.
5. Roll:
Set the
comfort temperature
6. Press: You save the input;
symbol
flashes.
7. Press: You accept
; the
setpoint
flashes.
8. Roll: Set the
economy temperature
.
9. Press: You save the input;
symbol
flashes.
10. Press: You accept
; the
setpoint
flashes.
11. Roll: Set the
frost
protection temperature
.
12. Press: You save the input;
symbol
flashes.
13. Press: You accept
; the
setpoint
flashes.
14. Roll: Set the
temperature setpoint
while
remote operation
is active.
15. Press the Esc button to return to the menu level:
The
heating
periods
menu
flashes.
(change not necessarily required; press the
Esc button again to return to the initial display).
In operating modes
and
, this
button can be pressed to make a manual
change from comfort to economy mode,
or vice versa. The change will
automatically be canceled when reaching
the next switching point or when
selecting another operating mode.
Siemens SBT / HVAC Products
CE1B2266en
02.07.2003
en
Operating Instructions
REV23M
