![background image](http://html.mh-extra.com/html/siemens/fpx/fpx_installation-instructions_384579001.webp)
Installation Instructions
Document No. 563-003
January 12, 2007
Wireless Field Panel Transceiver (FPX)
(Version 1.x)
Channel
Network I.D.
24 Vac 1.2VA
E H N
WLAN0006R1
Figure 1.
Wireless Field Panel Transceiver (FPX).
Product Description
The Wireless Field Panel Transceiver (FPX) is
mounted at or near the
fi
eld panel and is powered by
24 Vac. The antenna can be either mounted directly
to the radio or mounted remotely for installations
where the location of the FPX causes the antenna to
be shielded—for example, when the FPX is mounted
inside a
fi
eld panel enclosure.
Product Numbers
563-005
Wireless Field Panel
Transceiver (FPX)
(Version 1.x)
563-007
Direct Mount Antenna
563-008
Remote Mount Antenna
Transceivers do not come with antennas.
Antennas must be ordered separately.
Accessories
563-027
Pre-terminated Cable Kit
Includes two 14” cables:
– Power
– Communication
Warning/Caution Notations
WARNING:
Personal injury/loss of life may occur if you
do not follow the procedures as speci
fi
ed.
CAUTION:
Equipment damage or loss of data may
occur if you do not follow the procedures
as speci
fi
ed.
Expected Installation Time
10 minutes
Required Tools and Materials
•
Electro-static discharge wrist strap
•
Small
fl
at-blade screwdriver
•
Cordless drill/driver set
Prerequisites
•
All wiring must conform to NEC and local
codes and regulations.
•
24 Vac Class II power source is available.
•
Any application speci
fi
c hardware or device
is installed.
Item Number: 563-003, Rev. BA
Page 1 of 4