![background image](http://html.mh-extra.com/html/showmaven/tripod-series/tripod-series_user-manual_1260222001.webp)
Tripod Series
Tripod Projection Screen
USER’S GUIDE
Tripod Screen Parts Identification
Tripod Screen Setup
A. Setting up the screen:
Follow the steps below and Fig. 1 & 2.
1.
Place the screen in an upright position (fig.1) with the
legs toward the ground.
2.
Deploy the Tripod
Support legs
by pushing down on
the
Tripod Junction
.
3.
Turn the tripod’s screen casing in a 90-degree
horizontal position so that the screen casing is now
parallel to the ground with the screen handle facing the
bottom of the top hook.
4.
Completely extend the legs as much as possible so
they are stable and position them away from objects that
may interfere with their balance.
DO NOT
stand the
tripod on an unstable platform to avoid an injury should
the tripod screen collapse.
Vertical locking sleeve ring
Vertical
Extension Bar
Screen Material
Screen case
Tripod junction
Tripod Support Legs
End cap
3
2
4
Fig. 2
Fig.1
1
Top hook & Screen
handle
Support beam
Carrying handle & Screen height
adjustment lock/release tab