Important safety information. Read entire manual before use.
1
Safety and usage information
FCC Statement:
This device has been tested and found to comply with part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operation is subjected to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: Modification to this product will void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAN ICES-3 (A)/NMB-3(A)
IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de
licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de
brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
“This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est
conforme à la norme’
European Union:
RFI Emissions: EN 61000-6-3
Immunity:
EN 61000-6-2
Electrical Safety: EN/IEC 61010-1
ROHS:
This RoHS-compliant product conforms to the European Union Restriction of the Use of Certain
Hazardous Substances (RoHS) in Electrical and Electronic Equipment. Seek Thermal ensures RoHS
conformance by requiring supplier Declarations of Conformity, monitoring incoming materials, and maintaining
manufacturing process controls.
Attack
PRO
desktop charger quick start guide
1 (4)
4 (4)
Attack
PRO
desktop charger quick start guide
5
Cleaning and care
The Attack
PRO
battery charger requires little maintenance. For best care, please follow the guidelines below:
• Unplug the AC power supply from the AC power source before any cleaning
• Gently use a cotton swap damped with isopropyl alcohol to wipe the contacts if they appear dirty or
covered with debris
• To clean the charger housing, use a soft cloth with warm water only and a mild detergent. Do not use
solvents to clean the charger
• Do not allow any liquids or debris to enter the charger
Seek Thermal reserves the right to discontinue models, parts, accessories, additional items, and product
specifications at any time without prior notice.
6 Customer and product support
For any questions or issues with the use of this product, do not hesitate to contact our customer support group
at
www.thermal.com/support
.
7 Troubleshooting
If you are experiencing problems with your product, please refer to this checklist. If the problem persists, please
contact Seek Thermal Customer Services or your local distributor.
Power and charging
Seek Thermal Inc.
6300 Hollister Avenue
Santa Barbara, CA 93117
www.thermal.com
www.thermal.com/support
Disclaimer
Specifications subject to change without further notice. Models and accessories subject to regional market
considerations. License procedures may apply. Products described herein may be subject to US Export
Regulations. Please refer to thermal.com/support with any questions.
Issues:
Solutions:
Ensure battery is inserted correctly.
LED does not light when battery is inserted.
Ensure AC power source is adequate and safe.
Ensure battery contacts are clean.
Battery will not charge.
Clean battery charging contacts.
Ensure battery is inserted correctly.
RED flashing indicator when battery inserted.
Ensure AC power source is adequate and safe.
Ensure battery contacts are clean.
www.thermal.com
www.thermal.com
