12V/24V LED WARNING BEACON-
VARIOUS FITTINGS
MODEL NO:
WB951LED.V2, WB952LED.V2,
WB954LED.V2, WB955LED.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
9
Familiarise yourself with this product’s application and limitations, as well as any specific potential hazards peculiar to the beacon.
9
Replace or repair damaged parts.
Use recommended parts only. Non authorised parts may be dangerous and will invalidate the
warranty.
8
DO NOT
use the beacon for any purpose other than for which it is designed.
8
DO NOT
allow children to operate the beacon.
8
DO NOT
operate the beacon if any parts are missing or damaged as this may cause failure or possible personal injury.
9
When not in use switch the beacon off and where appropriate remove plug from power supply.
2. INTRODUCTION
3-Function control allows for different LED flash configurations. Heavy-duty ABS base. Quick release, UV stabilised dome will not
fade if exposed to prolonged sunlight.
WB951LED.V2 -
Single point mounting beacon suitable for direct mounting to vehicle roof using 12mm bolt.
WB952LED.V2
- Direct mounting beacon pre-drilled with 3 x 6.5mm holes.
WB954LED.V2
- Fitted with six powerful magnets, strong enough to cope with normal road speeds. Supplied with 3m coiled flex and
universal vehicle accessory socket plug.
WB955LED.V2 -
Flexible DIN element suitable for agricultural vehicles where standard beacons may be broken.
3. SPECIFICATION
MODEL No’s:
WB951LED.V2, WB952LED.V2, WB954LED.V2, WB955LED.V2
V
oltage:
............................................................12V/24V (DC)
L
ight Source ................................................SMD2835, 45pcs
M
ax. Current .......................................................1.6A @ 12V
M
ax. Current ........................................................0.8A @24V
W
orking Temperature ...........................................-30 / +50
o
C
E
MC ........................................................... E9 10R 05 16099
R
65 ...............................................................TA1 E9 00 6105
Waterproof
......................................................................IP56
4. FIXING INSTRUCTIONS
4.1.
WB951LED.V2:
12mm Single Bolt Fixing
4.1.1.
Drill a 13mm mounting hole in a suitable point on the vehicle.
4.1.2.
Connect to cables of at least 2mm² section and use an 8A fuse; check polarities.
4.1.3.
Fix the beacon by using nuts and washers according to the type and shape of the mounting surface
W
B951LED.V2, WB952LED.V2, WB954LED.V2, WB955LED.V2 Issue 1 14/12/20
Original Language Version
© Jack Sealey Limited
Refer to
instructions
WB951LED.V2
WB952LED.V2
WB954LED.V2
WB955LED.V2
