background image

INSTRUCTIONS FOR: 

PANEL BAG SET 4PC

MODEL NO:

 VS911.V3

IMPORTANT:

 

PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE 

PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 

PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

 1.  SAFETY

 2.  INTRODUCTION

 3.  SPECIFICATION

  VS911.V3   Issue: 1 - 13/06/14

Original Language Version

 © Jack Sealey Limited

1.1.  GENERAL SAFETY

 

WARNING!

 

Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.

  Familiarise yourself with the application and limitations of the panel bag set, as well as the potential hazards.

 

Maintain the

 

set in good condition.

  Replace damaged parts. 

 

Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 

Maintain correct balance and footing. Ensure floor is not slippery and wear non-slip shoes.

  Keep children and unauthorised persons away from the working area.

 

DO NOT

 put hands/fingers in apertures created by bags without first inserting a mechanical chock to prevent accidental injury.  

  DO NOT

 use the panel bags for purposes other than those for which they were designed.

 

DO NOT

 over-inflate.

 

DO NOT 

use on doors fitted with air bags.

 

DO NOT

 use when you are tired, under the influence of alcohol, drugs or intoxicating medication. 

  Deflate bag prior to storage.

  Clean, dry and store in supplied bag.

Multi-purpose durable air cushion devices with rigid edges and fine air control valve. Suitable for positioning panels, bonnets and boots, prior 

to fitment. 2mm bag thickness and semi-rigid construction allows bags to be slid between window frame and weather-stripping for improved 

access for emergency vehicle opening tools. Soft air cushion is gentle on paintwork, frame, beadings and glass. Supplied in a vinyl pouch.  

fig.1

Model No:  . . . . . . . . . . . . . . . . . . . . . . VS911.V3

Load Capacity: . . . . . . . . . . . . . . . . . . .  100kg

Bag Dimensions (W x H): . . . . . . . . . . .

Refer to fig.1

Bag 1: . . . . . . . . . . . . . . . . . . . . . . . . . . 40 x 182mm

Bag 2: . . . . . . . . . . . . . . . . . . . . . . . . . . 57 x 188mm

Bag 3: . . . . . . . . . . . . . . . . . . . . . . . . . . 160 x 160mm

Reviews: