background image

InstructIons for:

COMPRESSOR 50ltr 

diRECt dRivE 2.0hp 110v

 

model no:

  

SAC5020E110v

thank you for purchasing a sealey product. manufactured to a high standard this product will, if used according to these instructions and properly 

maintained, give you years of trouble free performance.

1.  SAFEtY iNStRUCtiONS

IMPORTANT:

 

PLEASE REAd tHESE iNStRUCtiONS CAREFULLY. NOtE tHE SAFE OPERAtiONAL REQUiREMENtS, WARNiNGS & 

CAUtiONS. USE tHE PROdUCt CORRECtLY ANd WitH CARE FOR tHE PURPOSE FOR WHiCH it iS iNtENdEd. FAiLURE tO dO SO MAY 

CAUSE dAMAGE OR PERSONAL iNJURY ANd WiLL iNvALidAtE tHE WARRANtY. PLEASE KEEP iNStRUCtiONS SAFE FOR FUtURE USE.

   

iMPORtANt!

  the use of extension leads to connect these  

    compressors to the mains is not recommended as the  

    resulting voltage drop reduces motor, and therefore pump  

  performance.

1.2.   GENERAL SAFEtY 

3   

familiarise yourself with the application and limitations of the  

    compressor.    

3   

ensure the compressor is in good order and condition before  

    use. If in any doubt do not use the unit and contact an  

  electrician/service 

agent.

    WARNiNG! 

Compressor must only be serviced by an  

    authorised agent. DO NOT tamper with, or attempt to  

    adjust, pressure switch or safety valve.

3   

Before moving, or maintaining the compressor ensure it is  

    unplugged from the mains supply and that the air tank  

    pressure has been vented. 

3   

maintain the compressor in good condition and replace any  

    damaged or worn parts. use genuine parts only. 

Unauthorised  

    parts may be dangerous and will invalidate your warranty.

3   

read the instructions relating to any accessory to be used  

    with this compressor. ensure the safe working pressure of any  

    air appliance used exceeds compressors output pressure. If  

    using a spray gun, check that the area selected for spraying  

    is provided with an air change/ventilation system.

3   

ensure the air supply valve is turned off before disconnecting  

    the air supply hose.

3   

to move the compressor use the handle only. maintain unit’s  

    centre of gravity when lifting. 

dO NOt

 attempt to lift or move  

    the compressor by any other means. 

3   

use the compressor in a well ventilated area and ensure it is  

    placed on a firm surface.

3   

Keep tools and other items away from the compressor when  

    it is in use, and keep area clean and clear of unnecessary  

  items.

3   

ensure the air hose is not tangled, twisted or pinched.

1.1.  ELECtRiCAL SAFEtY

  

WARNiNG!

 It is the responsibility of the owner and the operator 

to read, understand and comply with the following: You must check 

all electrical products, before use, to ensure that they are safe. You 

must inspect power cables, plugs, sockets and any other connectors 

for wear or damage. You must ensure that the risk of electric shock 

is minimised by the installation of appropriate safety devices. A 

residual current circuit Breaker (rccB) should be incorporated in 

the main distribution board. We also recommend that a residual 

current device (rcd) is used. It is particularly important to use an 

rcd with portable products that are plugged into a supply which is 

not protected by an rccB. If in any doubt consult a qualified 

electrician. You may obtain a residual current device by contacting 

your sealey dealer. You must also read and understand the following 

instructions concerning electrical safety:

1.1.1. the 

Electricity at Work Act 1989

 requires that all portable  

 

electrical appliances, if used on business premises, are tested  

 

by a qualified electrician, using a Portable Appliance tester  

 

(PAt), at least once a year.

1.1.2. the 

Health & Safety at Work Act 1974

 makes owners of  

 

electrical appliances responsible for the safe condition of  

 

those appliances and the safety of the appliance operators.  

 

if in any doubt about electrical safety, contact a qualified  

 electrician.

1.1.3. ensure that the insulation on all cables and on the appliance  

 

is safe before connecting it to the power supply. see 1.1.1.  

 

and 1.1.2. and use a Portable Appliance tester.

1.1.4. ensure that cables are always protected against short circuit  

 

and overload.

1.1.5. regularly inspect power supply cables and plugs for wear or  

 

damage and check all connections to ensure that none are loose.

1.1.6. 

important:

 ensure that the voltage marked on the appliance  

 

matches the power supply to be used and that the plug is  

 

fitted with the correct fuse.

1.1.7. 

dO NOt

 pull or carry the appliance by the power cable.

1.1.8. 

dO NOt

 pull the plug from the socket by the cable.

1.1.9. 

dO NOt

 use worn or damaged cables, plugs or connectors.  

 

Immediately have any faulty item repaired or replaced by a  

 

qualified electrician. When a Bs en 60309 plug is damaged,  

 

cut the cable just above the plug and dispose of the plug  

 safely. 

 

fit a new plug according to the following instructions:

 

a) Connect the GREEN/YELLOW earth wire to the earth  

 

 terminal.

 

b) Connect the BROWN live wire to the live terminal ‘L’.

 

c) Connect the BLUE neutral wire to the neutral terminal ‘N’.

 

d) After wiring, check that there are no bare wires, that 

 

  all wires have been correctly connected, that the cable  

 

  outer insulation extends  

 

  beyond the cable    

 

  restraint and that the  

 

  restraint is tight.

NOtE:   if using a transformer to  

 

  supply the compressor,  

 

  it must be rated at a  

 

  minimum of 2kvA to  

 

  allow the compressor  

 

  to run efficiently.

Original Language Version

© Jack sealey limited

   sAc5020e110V     Issue no: 4 (I) - 15/07/13

Reviews: