trolley jack 3 tonne long chassis
heavy-duty
model no:
1153cX.v5
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
9
ensure the jack is in sound condition and good working order. Take action for immediate repair or replacement
of damaged parts.
Use genuine parts only. The use of improper parts may be dangerous and will invalidate the warranty.
9
locate the jack in a suitable, well lit working area. Keep working area clean and tidy and free from unrelated
materials.
9
Use jack on level and solid ground, preferably concrete. Avoid tarmacadam as jack may sink in.
9
Place wedges under wheels of vehicle, but ensure the jack wheels are free to move and that there are no
obstructions.
9
ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or “PARK” if
automatic).
9
ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc., to allow for
vehicle tilting.
9
ensure there are no passengers in the vehicle and that all non-essential persons keep a safe distance whilst the
jack is in use.
9
Place jack under lifting points recommended by vehicle manufacturer (see vehicle hand book). ensure lifting
point is stable and centred on saddle.
▲
danger:
Use the jack for lifting only, noT for supporting the lifted load.
9
Use suitable capacity axle stands under the vehicle before proceeding with any task.
9
ensure there are no persons or obstructions beneath the vehicle before lowering.
8
do not
operate the jack if damaged.
8
do not
work under the vehicle until axle stands have been correctly positioned.
8
do not
exceed the rated capacity of the jack (3tonne). When lifting a load of maximum capacity or close
to it, it is recommended that the effort be reduced by the use of assistance during this operation.
8
do not
adjust the safety overload valve.
8
do not
jack vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
8
do not
allow the vehicle to move while supported by the jack, or use the jack to move the vehicle.
8
do not
top up hydraulic system with brake fluid. Use hydraulic jack oil only and use a qualified person to
maintain jack hydraulic system.
8
do not
allow untrained persons to operate the jack and
do not
use jack for purposes other than which it is
designed.
8
do not
allow persons to ride on the jack.
9
When not in use store jack, fully lowered, in a safe, dry, childproof area.
2. introduction
long chassis, high capacity, portable garage jack for serious hobby or recovery vehicle use. Tough pump bracket and heavy duty one piece
hydraulic unit with safety overload valve. Supplied with one piece pumping handle with rubber grip.
3. specification
Capacity .........................................................................3tonne
min. saddle height .........................................................140mm
max. saddle height ........................................................432mm
max chassis height ........................................................165mm
length ...........................................................................625mm
Weight ...............................................................................19kg
1153CX.V5 | Issue:2 (1,F) 22/01/19
Original Language Version
© Jack Sealey limited
Refer to
instructions
Wear safety
footwear
Apply
Chock
Wheels
Never
exceed
X2
