![background image](http://html.mh-extra.com/html/scunci/cs27jccsc/cs27jccsc_instruction-and-styling-manual_1220122001.webp)
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety pre-
cautions should always be followed, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER
—
Any appliance is electrically
live even when the switch is off. To reduce the
risk of death by electric shock:
1. Always unplug appliance immediately after
using.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or other
liquid.
5. If an appliance falls into water, unplug
it immediately. Do not reach into the
water.
WARNING
—
To reduce the risk of
burns, electrocution, fire, or injury to
persons:
1. This appliance should never be left
unattended when plugged in.
2. This appliance should not be used by, on,
or near children or individuals with cer-
tain disabilities.
3. Use this appliance only for its intended
use as described in this manual. Do not
use attachments not recommended by
the manufacturer.
4. Do not use an extension cord to
operate appliance.
5.
Never operate this appliance if it
has a damaged cord or plug, if it is
not working properly, if it has been
dropped or damaged, or dropped
into water. Return the appliance
to an authorized service centre for
examination and repair.
6. Keep the cord away from heated
surfaces.
7. Do not pull, twist, or wrap line
cord around appliance, even during stor-
age.
8. Never place the appliance on a soft sur-
face, such as a bed or couch, where the
air openings may be blocked.
9. Never use while sleeping.
10. Never drop or insert any object into any
opening or hose.
11. Do not use outdoors or operate where
aerosol (spray) products are being used
or where oxygen is being administered.
12. This straightener is hot when in use. Do
not let eyes or bare skin touch heated
surfaces.
13. Do not place the heated straightener
direct ly on any surface or on the
appliance power cord while it is hot or
plugged in.
14. Before plugging in, read the information
about dual voltage contained in the in-
struction section of this manual.
15. Do not touch the housing of your
appliance near the straightening plates as
it is hot when in use.
16. Do not touch hot surface of the
appliance; use handles or knobs.
SAVE THESE
INSTRUCTIONS
OPERATING INSTRUCTIONS
This straightening iron is intended for household
use. This unit is designed to operate at 125/250
volts AC. Use on Alternating Current (50/60
hertz) only.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
DUAL VOLTAGE
This straightening iron will automatically adjust
to the proper voltage. Use an adapter plug with
correct configuration, prior to use in outlet.
DRYING SYSTEM WITH UNIQUE
WET
•
DRY DESIGN
This Wet • Dry Ceramic Straightener features
our exclusive vent and channel design, allowing
for use on dry or damp hair. When used on damp
hair, excess water is forced into channels where
it can escape as steam. The steam evaporates
through the vents in the housing, while the hair’s
natural moisture is sealed into the cuticle.
CAUTION:
Steam evaporating through the vents
may be hot. During use, avoid touching or block-
ing the vents and direct drying vents away from
your scalp and face.
STRAIGHTENING BASICS
Plug the straightening iron cord into any
household outlet (125/250V). Press
power “On/Off” button. The iron will heat
up very quickly. The red indicator light will
stop blinking and remain on when the iron
is ready to use. To achieve faster styling
we have added a unique heat option of
Turbo heat with an "On/Off" feature. Press
the turbo button to deliver up to 15°C/
27°F more heat for maximum styling
performance (the green light will go on).
To turn off press power "On/Off" button
(both lights will go off). Never leave your
straightening iron on and unattended.
WARNING: The straightening iron's
ceramic-coated plates will get very hot
within a few seconds and should not be
placed in contact with the skin after the
straightening iron has been turned on.
Start with a hair section that is 1” wide and no
more than ½” thick. Open the iron and place a
hair section between the two hot plates, close to
the scalp. Trap hair between the plates by firmly
squeezing the handles together. While main-
taining the tension, slowly pull the unit down
along the hair section toward the end of hair.
For best results, use a light styling lotion before
blow-drying hair. At the end of hair section,
release the pressure on the handle and allow
the hair section to slide out. Repeat process on
additional sections of hair until you achieve the
hair style you desire. It may be necessary to
repeat process on certain areas, depending on
the texture of your hair or how damp it is.
Some experience is necessary when learning to
use this straightening iron. After using the iron
several times, you will learn the ideal way to
straighten and style your hair easily.
NOTE:
Please refer to the temperature
setting guide for heat settings, especially if
using your iron on damp hair.
STYLING WITH THE NEW EASY-GLIDE
CERAMIC-COATED PLATES
The plates of your new straighten-
ing iron have an easy-glide ceramic-
coated surface, the newest technology.
This means it’s not only simpler to clean
off styling product residue after each use,
but you’ll also find that hair glides eas-
ily over the surface of the plates as you’re
straightening. The ceramic-coated surface
also helps smooth down flyaways and frizz-
ies. As you smooth each strand, heat is evenly
distributed so that the style you create has
a salon-perfect, silky smooth, shining fin-
ish. Hair slips right off the plates after it’s
straightened.
The ceramic technology is a pleasure to work
with because it makes styling your hair easier
and the results more professional.
USING INSTANT HEAT, THE 25 WET
•
DRY
VARIABLE TEMPERATURE SETTINGS &
UNIFORM HEAT RECOVERY SYSTEM
This straightening iron features Conair’s
Instant Heat technology. It heats up to the
temperature you’ve selected for your hair type and
is then ready to use.
Within this Instant Heat technology there are
25 variable wet
•
dry temperature settings
for every type of hair, from the finest to the
curliest and most resistant. Use the low
settings for wet/damp hair and as your hair
dries turn to the medium settings. Once hair
is completely dry, use the medium to high settings
to complete the straightening process.
Temperature Setting Guide
And that’s not all. Conair’s professional salon
standards of engineering provide you with a
Uniform Heat Recovery System that maintains the
straightening iron at a constant temperature.
There is a constant surge of power to
ensure that heat is continuously delivered for
optimal styling results, unlike other units which
lose heat during use. This provides consistent
styling power so that every strand of your hair is
set with the same level of heat and comes out the
same way for a perfect finish.
TEMP. CONTROL
HAIR TYPE
Low/Wet 1-8
Delicate, thin, easy-to-straighten hair
Medium/Damp 9 - 14 Average to thick or treated hair
Med/High 15 - 20
Thick or wavy hair
High/Dry 21-25
Hard-to-straighten hair
Turbo
Up to 15°C/27°F burst of heat
for difficult styling spots