• Adjust the cable so it does not get snagged.
• Secure the product to the mounting bracket by
locating the screws through the “L” shaped slots (C)
in the ceiling cover and tightening the screws.
• Replace fuse or circuit breaker and switch on. Your
light is now ready for use.
• When changing a bulb, always switch off at the
mains and allow the bulb to cool before handling.
Dispose of used bulbs carefully. Do not exceed the
wattage stated or use a different shape bulb from that
indicated on the fitting.
• Use a soft cloth to handle bulbs, avoid directly
touching the bulbs as this will shorten their life.
• Remove bulb by turning a quarter turn anticlockwise
and pulling out.
• Push the bulb gently into the lampholder and twist a
quarter turn clockwise to engage pins.
Commissioning
Fitting/replacing bulbs (Max. 50W GU10)
Instruction leaflet
Arezzo 4 Bar Spotlight
73686, 73689
For your safety, always switch off the supply before changing lightbulbs, or cleaning.
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your Local Authority or retailer for recycling advice.
Recycling advice
Safety information
We recommend cleaning with a soft dry cloth.
Do not use solvents or abrasive cleaners as these could
damage the finish.
Iss.1 13/12/2018
MAX. 50W
GU10
WWW.saxbylighting.com
Saxby lighting. BH23 3PE
