![background image](http://html1.mh-extra.com/html/savant/wpx-lv06-series/wpx-lv06-series_quick-reference-manual_1203567001.webp)
Wireless Configurable Keypad for DMX Control - QRG
1 of 5
45 Perseverance Way, Hyannis MA 02601.
Copyright© 2021 Savant Systems, Inc. | 009-2075-00 | 211015
| 508.683.2500
Echo / Metropolitan Wireless Configurable Keypad for Basic DMX Control
Configurable Keypad - Echo Style (WPX-xxLV06)
Configurable Keypad - Metropolitan Style (WIX-xxLV06)
Products
Box Contents
(WPX-xxLV06, WIX-xxLV06)
Optional Accessories
(1) Keypad (faceplate not included)
(1) 4-pin Cable Control Station Pigtail (064-0417)
(2) Double Height Keypad Buttons (074-0927) - WPX Only
(2) Double Height Keypad Buttons (074-0808) - WIX Only
(1) Product Regulatory Statement (009-1950)
–
One to Four Gang Wall Plates (FIx-0S0xxP)
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Location
Indoor Use Only
Specifications
Dimensions and Weights
Length
Width
Depth
Weight
WPX-xxLV06
WIX-xxLV06
4.13 inch
(10.50 cm)
1.72 inch
(4.37 cm)
.97 inch
(2.46 cm)
.30 lb.
(0.13 kg)
Shipping
7.0 inch
(17.78 cm)
4.5 in.
(11.43 cm)
3.0 in.
(7.62 cm)
.60 lb.
(0.27 kg)
Installation Recommendations
Savant recommends as a minimum:
–
An open-backed low voltage bracket installed on the interior
walls and a closed-back electrical box on exterior walls.
–
An installation depth of at least 1
1/4
inches (3.2 cm).
Power
Input
24V DC
Average Power
Consumption
5W
Maximum Power
Consumption
12W
Maximum Wiring (DMX keypad to DMX Driver )
#20 AWG
328 feet (100 meters)
#18 AWG
492 feet (150 meters)
#16 AWG
618 feet (188 meters)
#14 AWG
984 feet (300 meters)
Minimum Supported Release
da Vinci 10.0
Regulatory
Safety and
Emissions
FCC Part 15
Class B
CE Mark
UKCA
RoHS
Compliant
A
B
C
D
E
A
Ambient Light Sensor
- Detects the level of ambient light
in the room and adjusts the brightness of the button and
dimming LEDs. The ambient light sensor is enabled and
disabled in Blueprint’s Lighting and Shade manager.
B
Dimming Level Indicators
- These LEDs can indicate any
of the following:
–
The power being applied to the load. The LEDs turn
on from left to right as power is increased and switch
off from right to left as power is decreased.
–
The power being applied to the load from any scenes
created in Blueprint or the Pro App.
–
The status of the keypad during the setup and
provisioning process. See the
LED States
section.
C
Reset Button
Press and release
- Reboots the keypad.
Press and hold
- Press and hold for 10 seconds, then
release to perform a factory reset. A factory reset erases
the keypad’s stored address and removes any assigned IP
Addresses.
D
Buttons
- Programmable buttons. See the
Low Voltage
Deployment Guide
for instructions on how to program.
This guide and other lighting information are available on
the
Keypad Lighting Documentation Portal
.
E
Button LEDs
- When configured and bound to a Savant
system, the LED’s state is defined by the selection made
in the
LED Behavior
and
LED Color
fields in the Lighting
and Shades Device Manager.
Front Panel
Quick Reference Guide