1
Instruction Manual
Non-Contact Countdown Timer Model TM-29
Thank you for purchasing the Non-contact countdown timer model TM-29.
Read this manual thoroughly before using and keep it in a safe place for your future references.
Features
Model TM-29 timer does not have a start/stop button. You can start the timer and stop the alarm by
only putting your hand over the sensor by adopting the
Non-contact
sensor. So this timer is
hygienic safety.
Names of Components
<
Front View>
<Rear View>
How to Use
Remove the battery insulating tape before using the timer for the first time.
1) Setting the alarm sound
Press the Sound setting button on the back of the unit to select the alarm sound. After selecting a
sound, press the Minute or Second setting button to set it and return to the time display.
*
Alarm sound 1
: Beep
Alarm sound 2
: Beep Beep
Alarm sound 3
: Beep Beep Beep Beep Beep
* If no button is pressed for 30 seconds while setting the alarm sound, the sound currently selected is
set and the unit returns to the timer display.
Setting Button (minute/
分
)
Setting Button (second/
秒
)
Magnet
Setting Button (sound/
音
)
Hooking hole
Battery Lid fixing screws
Battery Lid
Hole for buzzer sound
Press the
Sound (
音
)
button
Press the
Sound (
音
)
button
Press the
Sound (
音
)
button
A
larm sound 1
Alarm sound 2
Alarm sound 3
LCD Display
(Running time is displayed)
LED
lamp
Sensor: Non-contact sensor senses the hand and timer starts.
Sensitivity is about 3cm vertically from sensor.
