background image

_

English

_

  

 

STEAM IRON 

 

Z-1050-BXC 

 

INSTRUCTION MANUAL 

 
Before first use, please read the instructions carefully and keep the manual for future 
reference! 
 

BASIC SAFETY PRECAUTIONS 

1.

 

Before using for the first time, please check if the voltage rating on the type plate 
corresponds to the mains voltage in your home. 

2.

 

Make sure to unplug the appliance from the socket when leaving the iron even for a short 
while, and stand the iron on its end. Please leave the iron out of children reach. 

3.

 

The iron will be of high temperature when used, never touch it with hand or close to the 
flammable product in order to avoid accident. 

4.

 

Caution:

 Unplug the appliance from the socket before filling the iron with water. 

5.

 

Never immerse the iron in water or other liquid. 

6.

 

Please send the iron to the authorized service center for repair if any damage on cord 
occur. 

7.

 

Deposits or minerals in the water will lead to scales build up and block the steam hole, 
therefore it is advisable to use distilled water. 

8.

 

Do not use chemically descaled water. 

9.

 

The ejected steam is hot and therefore hazardous. Never direct the steam towards people. 

10.

 

The iron must be used and rested on a stable surface. 

11.

 

When placing the iron on its stand, ensure that the surface on which the stand is placed is 
stable. 

12.

 

Do not pull or carry by cord, use cord as a handle, close a door on the cord, or pull cord 
around sharp edges or corners. Keep the cord away from heat surfaces. 

13.

 

The iron is not to be used if it has been dropped, if there are visible signs of damage or if 
it is leaking. 

14.

 

This appliance is not intended for use by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they 
have been given supervision or instruction concerning use of the appliance by a person 
responsible for their safety. 

15.

 

Children should be supervised to ensure that they do not play with the appliance. 

16.

 

The iron must not be left unattended while it is connected to the supply mains. 

17.

 

The plug must be removed from the socket-outlet before the water reservoir is filled with 
water (for steam irons and irons incorporating means for spray water). 

 

BEFORE FIRST USE 

1.

 

The iron has been greased, and as a result, the iron may slightly smoke when switched on 
for the first time. After a short while, this will cease. 

2.

 

Before using for the first time, remove any sticker or protective foil from the soleplate. 
Clean the soleplate with a soft cloth. 

3.

 

Keep the soleplate smooth: avoid hard contact with metal objects. 

 
 
 

Summary of Contents for Z-1050-BXC









Reviews: