![background image](http://html.mh-extra.com/html/sanpro/jcd3007/jcd3007_quick-start-manual_809449001.webp)
JCD3007
1
English-French Translation
SAFETY INFORMATION
When Driving
Keep the volume level Iow enough to be aware of your surroundings.
When Washing your Vehicle
Do not expose the product directly to water, as this can cause electrical shorts, fire or other damage.
When Parked
Exposure to direct sunlight for an extended period of time can produce very high temperatures inside the mobile unit. Give the interior a
chance to cool down before starting playback.
Do not mount radio in close proximity of the engine compartment.
Use the Proper Power Supply
This product is designed to operate with a 12 volt DC negative ground battery system.
Protect the Disc Mechanism
Avoid inserting any foreign objects into the disc slot. Misuse may cause malfunction or permanent damage due to the precise mechanism of
this unit.
CAUTION:
THIS MOBILE CD PLAYER IS A CLASS I LASER PRODUCT. THIS UNIT USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION IF EXPOSED DIRECTLY. BE SURE TO OPERATE THE MOBILE CD PLAYER AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF. PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN.
WARNING:
•
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
•
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE RECOMMENDED
ACCESSORIES.
DISC NOTES
Compatible Disc Types
Table 1: General Disc Information
Disc Type
Logo
Diameter/
Playable Sides
Playback Time
Audio CD
12 cm single side
74 minutes
NOTE: CD-R and CD-RW discs will not play unless the recording session is closed and the CD is finalized.
Disc Maintenance
•
A dirty or defective disc may cause sound dropouts while playing. Before playing, wipe the disc using a clean cloth, working from the
center hole towards the outside edge. Never use benzene, thinners, cleaning fluids, anti-static liquids or any other solvent.
Insert label side up.
Do not bend.
Never touch the under side of the disc.
Wipe clean from the center to the edge.