![background image](http://html.mh-extra.com/html/samsung/un55c9000zf/un55c9000zf_quick-setup-manual_353742001.webp)
Step 3
: Connect External Devices
Connecting an AV device (DVD/Blu-ray player, cable/satellite box, etc.)
Step 2
: Connect Power and Antenna or Cable
Step 1
: Install the Batteries into the Remote
Touch Control
1
Slide and open the
battery cover in
the direction of the
arrow.
2
Insert the battery
with the Samsung
logo facing up.
3
Slide and close the
battery cover in
the direction of the
arrow.
Mini Remote Control
1
Turn the battery cover
counterclockwise to unlock it
and then separate the battery
cover.
2
Insert a 3V Lithium battery
with the + side facing down
into the battery cover.
3
Place the battery cover into
the remote control aligning it with the grooves and then turn the battery cover
clockwise to lock the cover.
✎
If the remote control doesn’t work, check the following:
x
Is the TV power on?
x
Are the plus and minus ends of the batteries reversed?
x
Are the batteries drained?
x
Is there a power outage or is the power cord unplugged?
x
Is there a special fluorescent light or neon sign nearby?
Quick Setup Guide
Congratulations on the purchase of your new Samsung TV.
Read this setup guide to get your TV up and running quickly.
1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12
AM EST.
To register this product, visit: www.samsung.com/
register.
STOP
Please do not return this unit.
If you have problems operating your
TV, call:
1-800-SAMSUNG (1-800-726-7864)
For web support please visit:
www.samsung.com/support
Connecting an audio device (Home Theater, etc.)
Connecting a PC
AUDIO OUT
DVI OUT
HDMI OUT
AUDIO OUT
COMPONENT OUT
AUDIO OUT
VIDEO OUT
AUDIO IN
OPTICAL
Analog Audio connection
Amplifier / DVD home theater
Using an Audio Cable
Digital Audio connection
Using an Optical Cable
Digital Audio System
Best Connection
HD connection (up to 1080p)
Using an HDMI Cable
DVD, Blu-ray player, HD cable box,
HD STB (Set-Top-Box),
satellite receiver
Device
HD connection (up to 1080p)
Very Good Connection
Using an HDMI to DVI Cable
Device
Using a Component Cable
Good Connection
Component connection (up to 1080p)
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Device
Lowest Quality Connection
Audio/Video connection (480i only)
Using an Audio/Video Cable
DVD, Blu-ray player, cable box,
STB satellite receiver, VCR
Device
Use one of the connections below to connect
your TV to an external A/V device.
We recommend using HDMI for the highest
picture quality.
Connect your TV to your Home Theater
or other audio device to enjoy enhanced
Sound quality.
Connect your TV to a PC to use it as a Monitor.
VHF/UHF Antenna
Connect Ant In to
• Wall cable jack
• VHF/UHF Antenna
• Cable or Satellite box
Ant or Cable Out
Use a 75 ohm (round) cable.
or
Antenna Cable
(Not Supplied)
Audio Cable (Not Supplied)
AV Adapter (Supplied)
HDMI to DVI Cable (Not Supplied)
Component Cable (Not Supplied)
Audio Cable (Not Supplied)
Video Cable (Not Supplied)
Audio Cable (Not Supplied)
Component Adapter (Supplied)
AV Adapter (Supplied)
HDMI Cable (Not Supplied)
Audio Cable (Not Supplied)
Optical Cable (Not Supplied)
DVI OUT
AUDIO OUT
AUDIO OUT
PC OUT
HD connection
Using an HDMI to DVI Cable
Using a D-Sub Cable
HDMI to DVI Cable
(Not Supplied)
D-Sub Cable (Not Supplied)
Audio Cable
(Not Supplied)
Audio Cable (Not Supplied)
OPEN
CLOSE
Step 4:
Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language, set
the clock mode, and launch the TV’s channel memorizing process.
It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow
buttons on your remote. To make a selection, press the
ENTER
E
button.
To skip a screen, press the
MENU
button. To turn on your TV, press the
POWER
button on the remote or on the TV. To run Plug & Play, follow these steps:
1
Turn on the TV and Touch Control, and
then tap
OK
on your remote.
✎
It may take about one minute to establish
a wireless connection between the TV and
Touch Control using the Samsung Wireless
LAN Adapter.
2
Connect the Samsung Wireless LAN
Adapter to the TV. If you are failed, reconnect the Samsung Wireless LAN
Adapter and then try again. For connecting the Samsung Wireless LAN
Adapter, please see your Owner’s Manual.
3
Using your remote control, select the language for the On Screen Display
(OSD), and then press
ENTER
E
button.
4
Select
Home Use
, and then press the
ENTER
E
button. If you select
Store
Demo
, the TV will reset your picture and audio settings every 30 minutes.
5
Select
Antenna Source
. If
Antenna Source
is
Air
,
Cable
or
Auto
, you must
select your cable system type. After selecting source, select
Search
; then
press the
ENTER
E
button on your remote.
✎
Most cable systems are Standard(STD) systems, If you are not sure about
what kind of cable system you have, contact your cable company.
✎
If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After
Plug & Play is complete, set your TV to Channel 3 or 4, according to the
directions for your cable or satellite box.
6
The TV memorizes the available channels. This process can take up to 45
minutes.
7
After the TV has memorized the channels, choose the
Clock Mode
. Select
Auto
if you have a digital channel in your area. Select
Manual
if you don’t, or
if you have a cable or satellite box. When done, press the
ENTER
E
button.
✎
If you select
Manual
, the clock setting screen appears.
8
Select the daylight savings time setting:
Off
or
On
, and then press the
ENTER
E
button.
✎
This function is only available when the
Clock Mode
is set to
Auto
.
9
Select the time zone in which you live, and then press the
ENTER
E
button.
10
After the time zone screen, The connection method for best HD screen
quality is displayed. Press Right arrow button on your remote to view each
screen in succession. Press the Blue button to skip this section.
11
The
Enjoy your TV.
screen appears. Then press the
ENTER
E
button.
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specific
types of video input. If you have a cable box or satellite receiver, it may have its own
set of screen sizes as well.
To change the screen size, press the
P.SIZE
button on your remote. The first time
you press it, your TV displays the current setting. Thereafter, each time you press
the
P.SIZE
button, you change the size of the picture on the screen.
The following sizes are available:
16:9
Wide screen
4:3
Standard screen
Wide Fit
Zoom 1
Zoom 2
Screen Fit
✎
Screen Fit:
Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
Changing the Picture Mode
Your TV has four preset
Picture
Modes with factory adjusted settings, each
designed to give you an excellent picture under specific conditions.
The
Picture
Modes are listed and described in the table below:
Mode
Description
Dynamic
Brightens picture. For a vibrant, enhanced image in brightly lit or
sunny room.
Standard
For a bright, detailed picture in a normally lit room.
Natural
For a comfortable, easy-on-the-eyes picture in a normally lit room.
Movie
For a studio quality cinema picture in a dimly lit or dark room.
To change the
Picture Mode
, follow these steps:
1.
Turn on your TV, press the
TOOLS
button on your remote. The
Tools
menu
appears.
2.
Using the
▲
or
▼
on your remote, select
Picture Mode
.
3.
On the
Picture Mode
menu, use the
◄
or
►
on your remote to select the
Picture Mode
you want.
4.
Press the
EXIT
button to exit the menu.
[QSG-9000]BN68-03089A-01Eng.indd 1
2010-09-03 오후 4:40:04