Microphone Pad Settings
Your new Sabine handheld microphone is designed to accept
a wide range of input levels, from spoken word all the way up
to screaming vocals. In order to accommodate this broad range
of inputs, the microphone has a pad setting. Your mic is now
set to -14 dB, which is the preferred setting for concert vocal
performance.
Transmitter PAD Adjustment
1. Use the Transmitter Select button to scroll
through functions until PAD flashes in the
Transmitter LCD.
2. Use the Up or Down buttons to select ei-
ther 0, -6, -14 or -20. Selection is stored
after 3 seconds of inactivity.
3. Check to see if the receiver’s Audio Level
Meter stays out of the Clipping Zone.
Transmitter Controls
1
Select Button
2
Up Button
3
Down Button
To Close:
Turn the
housing and push up
until it meets the
threads, then screw on.
To Open:
Unscrew
lower portion of micro-
phone. Pull down as
you continue to turn
the housing.
Venue
Speech
0 dB
Loud speech
& vocal performance
-6 dB
Strong vocal
performance
-14 dB
Very strong vocal
performance
-20 dB
Suggested PAD Settings
PAD
Adjust PAD setting so that Re-
ceiver Audio Level Meter stays
out of the clipping zone (last
segment).
If you need more output out of the micro-
phone (the receiver LCD
AUDIO
meter shows
the mic output level) then change the pad
settings as described below.
When any level of attenuation is pro-
grammed, the default screen will illuminate
PAD.
Microphone Pad Settings
Your new Sabine handheld microphone is designed to accept
a wide range of input levels, from spoken word all the way up
to screaming vocals. In order to accommodate this broad range
of inputs, the microphone has a pad setting. Your mic is now
set to -14 dB, which is the preferred setting for concert vocal
performance.
Transmitter PAD Adjustment
1. Use the Transmitter Select button to scroll
through functions until PAD flashes in the
Transmitter LCD.
2. Use the Up or Down buttons to select ei-
ther 0, -6, -14 or -20. Selection is stored
after 3 seconds of inactivity.
3. Check to see if the receiver’s Audio Level
Meter stays out of the Clipping Zone.
Venue
Speech
0 dB
Loud speech
& vocal performance
-6 dB
Strong vocal
performance
-14 dB
Very strong vocal
performance
-20 dB
Suggested PAD Settings
PAD
Adjust PAD setting so that Re-
ceiver Audio Level Meter stays
out of the clipping zone (last
segment).
If you need more output out of the micro-
phone (the receiver LCD
AUDIO
meter shows
the mic output level) then change the pad
settings as described below.
When any level of attenuation is pro-
grammed, the default screen will illuminate
PAD.
SW70-H1 Quick Guide Setup
SW70-H1 Quick Guide Setup
1
2
3
Transmitter Controls
1
Select Button
2
Up Button
3
Down Button
To Close:
Turn the
housing and push up
until it meets the
threads, then screw on.
To Open:
Unscrew
lower portion of micro-
phone. Pull down as
you continue to turn
the housing.
1
2
3
SABINE
SABINE
Summary of Contents for SW70-H1 - QUICK GUIDE SETUP
Page 1: ......
