INSTRUCTIONS MANUAL
MOD. HM-4019
Before operating this unit, please read the instructions completely and save them.
Before operating this unit, please read this instruction completely, please keep the manual for
handy reference.
Parts identification (see fig.1)
1.
Working indicator
2.
Switch
3.
Ceramic coated plates
4.
Lock
5.
Swivel power cord
Before Use
1. Straightener is suitable for mains voltage 220V-240V~ 50Hz, rated power 30W.
2. Straightener switch in
“
○
”
status.
How to use
1.
Connect the plug to a power supply socket
2.
Switch hair straightener on by pushing the switch to
“
━
” ,
the working indicator
light, the straightener heats up.
3.
Hand hold staghtener, reversion release lock, unlocks the straghtener.
4.
Comb your hair and take a section that is not wider than 5cm for straightening.
5.
Place it between the straightener plates and press the handles firmly together.
6.
Side the straightener down the length of the hair in a single motion (not more than 5
seconds) from root to end, without stopping to prevent overheating.
•
To create flicks, turn the straightener half-circle inwards (or outwards) when
it reaches the hair ends. Hold the straightener in that position for 2 to 3
seconds, and then release it.
7.
Repeat steps 4 to 6 until you achieve the desired look.
After Use:
1.
Switch off the hair straightener and unplug it
