background image

104473 Issue B
ECN: 07 007

RIWC9G

P R O D U C T   D I M E N S I O N S

C A N O P Y   I N S T A L L A T I O N   I N S T R U C T I O N

450

92

65

195

Ø270

898

73

500

450-850

Ø200

180 from Wall to
Centre of Chimney

All Dimensions are in millimeters

Visit our Website at:

Electrical Rating:
280W (1.16A) Max. at 240V 50Hz

YEARS

WARRANTY

2

 distributed by

Robinson Industries Ltd

P.O. Box 51 201, Pakuranga

Auckland, New Zealand

TEL: 64 (9) 272 5129
FAX: 64 (9) 272 5148

ISO9001 Certified

email: [email protected]

 for service of advice in Australia contact

Robinhood Pty Ltd A.C.N 079 616 550

P.O. Box 4189, Mulgrave

Victoria 3170

TEL: 1800 648 556
FAX: 1800 628 577

email: [email protected]

RECOMMENDS UNIDUCT DUCTING

SYSTEMS FOR RANGEHOODS

- 1 -

- 8 -

Summary of Contents for RIWC9G

Page 1: ...trical Rating 280W 1 16A Max at 240V 50Hz YEARS WARRANTY 2 distributed by Robinson Industries Ltd P O Box 51 201 Pakuranga Auckland New Zealand TEL 64 9 272 5129 FAX 64 9 272 5148 ISO9001 Certified email enquiries robinhood co nz for service of advice in Australia contact Robinhood Pty Ltd A C N 079 616 550 P O Box 4189 Mulgrave Victoria 3170 TEL 1800 648 556 FAX 1800 628 577 email enquiries robin...

Page 2: ... it leaves the factory IMPORTANT Please read prior to installation or operation Always switch power off prior to installing servicing or cleaning the appliance Never use the appliance without filters Please read the notes on general cleaning especially the filters Exhaust air must not be discharged into a heating flue or wall cavity Unless the cavity is designed for that purpose Areas where the ra...

Page 3: ...ing the filters NOTE Stainless steel is very easily damaged during installation if abraided or knocked by tools WARNING This hood has been designed to be wall mounted above a cooking hob with one side resting against a wall Because of the complexity and weight of the hood its installation should be carried out by qualified staff taking care to respect all local regulations on air discharge The man...

Page 4: ...FITTING 1 Ducting fitting This is possible for all forms of installation a Connect the air outlet to the external ducting system b Remove the activated charcoal filter if there is one inside the hood canopy 2 Recirculation fitting This is only possible with the air outlet directed upwards Fit the venting grille G on to the air outlet fig 25 The activated charcoal filter should be fitted inside the...

Reviews: