For one year from date of purchase, Road Shower will repair or replace this Road Shower 2,
free of charge, if defective in material or workmanship. Service is available by contacting Road
Shower by phone or email and obtaining an Return Merchandise Authorization (RMA) before
returning the Road Shower 2 to Road Shower, LLC. Units will not be replaced, refunded, or
repaired without an RMA. We will give you our warehouse address with the RMA. Once you
have your RMA, attach to your Road Shower 2, your name, address, and telephone number,
description of the problem and proof of date of retail purchase (sales slip). Package in original
box (if you have it) and send transportation prepaid to Road Shower, LLC. You may also return
Road Shower to your Road Shower dealer.
99% of the problems can be handled by obtaining a spare part from us. This is much easier
for you and us. Just call or email, and we will get that part to you.
Road Shower, LLC shall not be liable for any incidental or consequential damages. Some
states do not allow the exclusion or limitation of implied warranties, incidental or consequen-
tial damages, so the above limitations and exclusions may not apply to you. This warranty does
not cover damage resulting from misuse, abuse, neglect, alteration or modification, improper
installation or operation, or unauthorized repair or service. This warranty does not cover any
representation or warranty made by dealers beyond the provisions of this warranty.
Road Showers out of warranty. Contact us or repair charges. We may be able to ship you the
part that you need. Check our website for parts available from Amazon. We try to use widely
available parts.
The Warranty gives you certain legal rights, and you may also have other rights which may vary
from state to state.
Road Shower is currently manufactured in China and was invented and is designed in the US.
See website for current telephone number
E-mail: [email protected]
Web site: www.roadshower.com
Road Shower, LLC
Santa Fe, NM
Road Shower 2 Owner’s Manual
Safety Rules and Instructions—read before use
This safety alert symbol indicates important safety messages in this manual. When you see this
symbol, be alert to the possibility of personal injury and carefully read the message that follows.
Congratulations. You have purchased the finest portable camping shower on the market today. This shower
uses the renewable energy of the sun to heat the water. Please read this manual. With minor care, your
Road Shower should give you many years of service. There are also several how to videos at
www.roadshower.com that will help you get the most from your Road Shower.
Parts: Each Road Shower comes with the following parts:
•
1 owners manual,
•
Mounting hardware which consists of: (4 long carriage bolts, 4 short
carriage bolts, 4 locking nuts, 4 locking washers and 2 mounting brack-
ets, and 2 spare pads),
•
spare hose clip in case you had one break during shipping,
•
LCD thermometer which you can stick onto the tank anywhere you
want. Just remove the backing and stick in on.
Mounting: Road Shower comes with 2 mounting brackets. Each bracket is secured with 2 carriage bolts and
2 nylock nuts and 2 lock washers. You will find 8 carriage bolts. You will use only 4. Use either the long
ones, if you have a thick rack, or the short ones if you have a thinner rack such as Yakima or Thule bars.
Slide the bolts down the slot in the Road Shower so that a bolt is on either side of your cross bar. If you
have a factory rack with nice paint, you should consider putting some vinyl tape or the spare sticky pads
included over the bar where the Road Shower will rest, to protect the paint. Put the mounting bracket
curved side up and line the bolts up through the holes in the bracket. Secure with the nylock nuts. You don’t
need the washers the first time. Use a 1/2” wrench or a socket wrench to tighten the nuts. They should be
very tight. You can tighten them as tight as they go. Once both brackets are secure, push and pull on the
Road Shower sideways, and see if it slips along the bar. If it slips, tighten more. If you reuse nylock nuts,
they lose their ability to stay locked. Be sure to use your lock washers if you reuse the nylock nuts.
Be sure to mount the Road Shower securely and tightly. Check and tighten after driving on
rough roads, as it could loosen. Failure to do so, could result in the Road Shower flying off your
vehicle in a quick stop or an accident, causing injury to other people or vehicles. It could also
cause damage to your own vehicle. Make sure nozzle
and hose are secured to the hose mount prior to traveling with the
Velcro straps on both ends of the tank. You can also remove the
hose when you are not using the Road Shower, but do not want to
remove the tank. Just turn the water supply off with the black han-
dle on the elbow and unscrew the hose.
Care and Handling. Your Road Shower is built tough. If you drop it
on the ground, it might scratch or dent. If you leave it full during
freezing weather, it may dent or expand or rupture. However, with
moderate care, it should last you a lifetime.
