Street Light Timer
1
V
er
si
on
1
.0
–
07
/1
9
Web: www.rmgautomation.com eMail: [email protected] Contact: 044 - 43180017
Street Light Timer
It is real time based timer which is used to control the street lights. It automatically
switch on/off the street lights at the preset time. By using this timer, we can switch off the lights
during the day time preventing power wastage unnecessarily. These street light timers has a
wide range of application where it can be used with floodlights in railway yards, gardens or for
straircase or parking lights, security lights, banking glow sign board, compound lights, outdoor
lights. These timers are ideal for saving the electricity in day time. It has an inbuilt battery
backup for 1000 hrs. It always shows real time on display. It has an having heavy duty relay
output (30 AMPS) can connect 3000 W load directly.
Product Description:
Power ON/OFF switch:
This switch is provided at the bottom of the device to switch ON or switch OFF
the con troller unit.There is a power ON delay of 6 seconds.
Fuse:
Auto cut off in event of any excessive current.
Alpha numerical 2x16 LCD display:
1.
Home Screen
: It will display the current date and day on the first line. It shows the current time
and status on the second line.
2.
Status in the LCD:
It includes Auto / Manual, Relay ON / OFF.
Menus:
1.
Set Date / Time:
It helps to set the current date, month, year, hours, minutes and day.
2.
Set ON & OFF time:
It helps to set the ON & OFF time slots.
3.
Mode:
It helps to select the AUTO / MANUAL operation. In AUTO mode, the timer works based on
the set time. In MANUAL mode, NEXT and UP keys are used for switching ON /OFF operation.
4.
Change Password:
It helps to change / update the current password.
INPUT keys:
1.
SET key
: It is used for entering the menu and to save the settings.
2.
NEXT key
: It is used for moving to the NEXT options like Menu, Successive Locations.
3.
UP key:
Used to set the values in date, time, password.
Installation steps
Power Connection:
Caution: Switch off the main power while doing the Power Connection steps.
Step 1:
Connect Phase and neutral (AC 230V) to red and black (paired) wire of the timer respectively as
shown in the
Picture1
.
Step 2:
Connect Blue pair cable to the switch or MCB of the Street Light in parallel as shown in the
Picture1
.
