ESPRIT L Remote control System
Quick Installation Guide (systems only)
The ESPRIT system provides 4 switches each capable of switching up to 1KW (4A @ 110V). Each channel is inde-
pendent and separately controlled. The ESPRIT Remote control system provides 110V mains switched outputs via
each terminal.
1.
First mount the ESPRIT system receiver box in the wall in your desired location.
2.
Open the enclosure by removing fixing screws from the enclosure front and then removing the front
from the
enclosure.
3.
Wire either MAINS, LIVE, Neutral and Earth connections to the power supply screw terminal as shown
below
(shown as A).
Or wire 12
-
32Vac or 12
-
32Vdc to the low voltage terminals.
(shown as B)
4.
Wire your desired connections to the relay switches
(shown as C)
5.
Once all required wiring is complete, use the handheld ESPRIT transmitter to switch the outputs on and
off.
6.
As supplied, the handheld will operate the outputs
-
Button 1 to output 1, Button 2 to output 2 etc.
7.
All buttons will operate in a latching mode
-
Press for on, press again for off. It is possible to change the
operation
to momentary mode by fitting the links
(shown as D)
8.
For advanced operation such as adding extra transmitters different button mapping options see
datasheet.
Fig 1.1
Please contact RF Solutions if any components are missing
Sales: +44 (0) 1444 227910 Tech. Support: +44 (0) 1444 227909
RELAY 1
RELAY 3
RELAY 4
FUSE
POWER
TIMER
RELAY 1
RELAY 2
RELAY 3
RELAY 4
SYNC
TEST
ERASE
L N E
8
7
6
5
4
3
2
1
0V
dc
12
-3
2V
dc
NO COM NC
NO COM NC
NO COM NC
NO COM NC
CONNECT EITHER
110Vac OR 12-32Vdc
NEVER BOTH
110V INPUT
SUPPLY
A
C
D
B
QS
-
ESPRIT
-
L
-
1
ESPRIT LOW VOLTAGE Series
Quick Start Guide
What
’
s in the box?
1 x Receiver with 5 additional
cable glands
1 x FOBBER Key Fob
(System only )
For full details of
ESPRIT
’
s
programmable
features, see
ESPRIT Remote
Control System
Quick Start Guide
Please contact RF Solutions if any components are missing.
Sales: +44 (0) 1444 227900 Tech Support: +44 (0) 1444 227909
