background image

MODERN SOUND FOR YOUR CLASSIC

Face & Shaft to Body

Extension Cable

 

Installation Guide

The information enclosed in this installation guide is intended to provide a general outline to assist you 
during the process of installation. This guide does not cover every installation possibility, vehicle, or aspect 
of the installation process.

Retro Manufacturing, LLC, or its subsidiaries assume no responsibility for proper or improper installation. 
Every attempt has been made to make this installation guide as informative as possible. This guide may 

be updated from time to time, and specifications are subject to change without notice. Please check our 

website (www.retromanufacturing.com) for the latest updates.

Summary of Contents for M2-FBC-1

Page 1: ...over every installation possibility vehicle or aspect of the installation process Retro Manufacturing LLC or its subsidiaries assume no responsibility for proper or improper installation Every attempt has been made to make this installation guide as informative as possible This guide may be updated from time to time and specifications are subject to change without notice Please check our website w...

Page 2: ...able into the radio shafts Remove the plastic shaft cover by removing the four small black screws at the back of the shaft do not lose the screws Re install the shaft cover with the four small black screws Repeat these steps with the second shaft Plug the extension cable s connector into the PC board of the shaft Please do not force the connector into the socket it only installs one way see the lo...

Page 3: ...dy remove the two screws on each side of the face and gently detach the Radio Face from the Radio Body Remove the white connector from the PC board of the Radio Face Plug the large white connector of the extension cable into the Radio Face Plug the RJ 11 telephone plug connectors into the sides of the Radio Body Then plug the large white connector into the Radio Body ...

Page 4: ...nly applies to products purchased and serviced in the continental United States This warranty is extended only to the original purchaser of a new product that was not sold as is A purchase receipt or other proof of the original purchase date is required for warranty service To handle warranty issues contact us at tech retromanufacturing com or 888 325 1555 All returns and warranty issues must be a...

Reviews: