![background image](http://html1.mh-extra.com/html/resolution-products/re152/re152_user-manual_1444832001.webp)
RE152_GE-Compat_Code_Keypad.doc
Page 1 of 3
3-Aug-12
www.ResolutionProducts.com
Wireless
Security
Solutions
RE152 GE-Compatible Code Keypad
Features
•
Secure, 4-digit Code to disarm
•
1-button arming
•
Red/Green LED arming feedback
•
Small, yet comfortable keypad
•
Mounts on wall via VHB® tape, or screws
•
Secure for carrying in purse or mounting on car visor
•
Strong, reliable RF signal.
•
4-6 year battery life on CR2032 battery.
Key Instructions
•
Code programming
Default access code is “1234”.
To change access code:
1.
Enter current 4-digit access code.
2.
Within 4 seconds, press and hold the “1” and “3” keys
simultaneously. After 3 seconds, Red LED will be lit.
3.
Enter new 4-digit access code. After successfully changing
the code, the Green LED will be lit
4.
Note new access code . BAD GUY CANNOT RESET CODE.
So it must be noted and remembered!
•
Enrolling:
1.
Refer to the GE control unit installation manual.
2.
Put the control panel in RF Learning mode.
•
Press both the Stay & Away buttons simultaneously
for 3 seconds.
3.
…Or if using a Downloader in ID entry mode
•
Enter the Download ID the device
(located on a label on the unit’s back or in unit).
Operation
Stay button
Arms panel to STAY, keypad flashes double red.
Away button
Arms panel to AWAY, keypad flashes double red twice.
Stay & Away buttons simultaneously for 3 seconds
Panic Alarm.
Keypad flashes red 8 times.
Entering 4-digit code
Disarms panel, keypad flashes double green.
RE152_GE-Compat_Code_Keypad.doc
Page 2 of 3
3-Aug-12
www.ResolutionProducts.com
Specifications
More securely replaces:
GE TX-3030-01-1 4-button Wall Touchpad
Crystal Compatibility
Not supervised.
Replacement Battery:
CR2032 Lithium / Manganese Dioxide
Temperature Range:
0F to 120F
Housing dimensions:
2x2.25x0.33 inches
Specifications subject to change without notice.
Pictures
Battery Replacement
CR2032 Battery
+ Terminal up
Insert
Screwdriver here
to open
Red/Green
Status LED
Stay + Away
=
Panic (Enroll)
1 + 3
=
New Code