Complete Cable Entry Dial Assembly - Supplied
with the Enclosure
1. Unscrew the end cap on the ceramic socket.
2. Then carefully unscrew the ceramic socket around
5 mm
opening
(2 Turns)
.
3. Place the C-Ring around the bottom of the screw thread, then
tighten the ceramic socket and end cap.
4. Remove the complete cable entry dial assembly on your Reptile
One Enclosure. The locking ring and Cable Dial are not required
for this assembly. (Diagram A)
5. Assemble and attach the ceramic socket to the enclosure as
shown in Diagrams B & C.
Thread the plug back through the Cable Dial Ring to screw the
dail ring to the cage frame lid.
6. (Optional) For a more secure hold we recommend also using
the screws provided to secure the cage frame to the enclosure
when caging strong animals such as pythons.
7. Screw bulb into the ceramic holder.
8. Replace the Mesh cage frame by slotting in the locking
prongs and twisting counter-clockwise. (Refer to Diagram C)
Heat Lamp Cage
Next Best Thing to Nature!
1
2
3
4
Included:
1 x Cage frame
1 x Cage frame lid
1 x C-Ring
4 x Screws
1 x Instruction
Manual
For Reptile One
Brand Enclosures
and Terrariums
1
4
2
3
Cable Dial
(supplied with
enclosure)
Lid Mesh
Cage Frame Lid
Ceramic Socket
-Sold Seperately
Diagram C
Diagram B
O
P
EN
C
L
O
S
E
Diagram A
ring
Locking ring
Cable Dial ring
Cable Dial
Locking Prongs
CAUTION:
WHEN CHANGING THE HEAT LAMP BE SURE TO LET THE LAMP CAGE
AND BULB COOL DOWN BEFORE HANDLING.
Ceramic socket not included
- Sold Separately
C-Ring
