Bluetooth® User Manual
Know your headphone:
Bluetooth® On/Off Instructions:
1.
Turn on: In the state of power off, press and hold the power button for 1s, the headset will send out two "dodo" prompt tones; hold it for 4s,
blue LED light will be on and flashing.
2.
Turn off: In the state of power on, press the power key and hold it for 5s, until the red LED light is flashing three times. There will be three
"dodo" voices from loud to low.
Function Description
Wired headphone
This Bluetooth headphone can be as the
wired headphone, just simply attached 3.5mm audio cable.
In the state of power off, it can be used as the wired stereo headphone by inserting the 3.5mm audio cable. Please
adjust the volume of sound sources when it is as the wired headphone. At this case, the volume control of the
headphone cannot be workable.
