![background image](http://html.mh-extra.com/html/renzetti/true-rotary-traveler-2200-series/true-rotary-traveler-2200-series_manual_1443229001.webp)
Note:
This screw for setting drag only.
It is not intended to lock the rotary shaft.
2
6
8
4
7
10
9
12
13
14
11
15
16
24
21
23
20
17
18
19
3
22
1
5
2
R
2,037,995
2,535,148
25
26
1. Loosen stem lock screw enough to prevent interference with stem.
2. Slide stem into the hole in pedestal base and secure the stem by tightening the stem lock screw.
3. Slide the cradle support collar onto the pedestal base stem with the flat side up as shown in the
diagram.
4. Slide the cradle support onto the pedestal base stem as shown. Use the cradle support tension
screw to add drag to the cradle support as desired.
5. Attach the vise to the pedestal base stem and tighten. Be careful not to cross the threads when
attaching the vise.
6. Loosen the stem lock screw to turn the vise to the desired position.
7. Slide the cradle arm into the hole in the cradle support. If the cradle is not in a comfortable position
hold the cradle arm firmly and rotate the cradle to the desired position. See detail 1.
8. Slide the cradle support collar and cradle suport up or down so that the cradle is on or just
below the center line of the rotary shaft.
Stem Lock Screw
Tension Screw
Cradle Support
Cradle Arm Lock Screw
Cradle Support Collar
Pedestal Base
Cradle Support
Detail 1
Cradle Arm
Rotate
Rotary Shaft Left Hand
Jaw O-Ring
Primary Jaw
Secondary Jaw
Ball Bearing
Lube O-Ring
Traveler Cam Assly.
C2200 Primary Knob
Traveler Rotary Head Assly.
Rotary Shaft Right Hand
Nylon Flat Washer
Rotary Tension Screw
Traveler Crank Arm
C2200 End Cap (Traveler)
Description
Rotary Shaft
We urge you to take time to familiarize yourself with the mechanics of your Traveler
vise. Rotary tying can be easier and more productive. See tips (opposite page).
Please return your warranty card to validate your warranty.
290-40840
1
290-40337
13
220-22016
290-40336
130-03017
130-03024
290-40313
130-03016
290-40842
220-22015
290-40271
290-40269
110-00005
120-01658
12
11
9
10
8
7
5
7
6
3
4
2
Part No.
Item
Jaw Spring
1
130-03038
14
1
Cradle Support Lock Screw
Center Line
Set
Vise Assembly
1
1
1
1
1
2
1
1
1
1
2
250-40004
252-40158
252-40186
21
23
22
290-40255
290-40263
110-00003
110-00042
120-01147
120-01450
18
20
19
16
17
15
Cradle
7" Traveler Stem
Traveler Base Assembly
Stem Lock Screw
Jaw Adjusting Screw
Cradle Support
Cradle Support Collar Assly.
Cradle Arm Lock Screw
Jaw Mounting Screw
1
1
1
1
1
1
1
1
1
Note:
C2203 Parts List
Qty
Qty
*Lubricate all threads and moving parts as needed
True Rotary
Model# C2203 Pedestal Base Vise
Renzetti Traveler 2200 Series
Item
Part No.
Description
Your vise has been assembled and lubricated at the factory. All you have to do is assemble the
bobbin cradle and attach the vise to the stem. The jaws on your vise have been black oxide
coated and then oiled. After use they should be coated with oil or rust inhibitor such as WD-40 to
prevent rust or oxidation caused by acidity in your fingers. Any light general purpose grease,
preferably silicone grease, can be applied on any moving part or o-ring*.
Please note, our warranty does not cover rust damage.
For the complete line of Renzetti products and accessories. Please visit our website:
www.renzetti.com or truerotary.com
Covered under U S Patent & Registration No.:
2,51441; 2,077,565; 2,060,740; 2,567,674
2,535,148; 6,564,494B2; 2,037,995
Made in the USA 02/12/19
Cradle Arm Assly.
290-40264
24
1
25
120-01149
Stem Support Lock Screw
1
Stem Support
26
252-40180
Stem Support
1