www.rayteccctv.com
Raytec Global Tel: +44 (0) 1670 520055
Americas Tel: +1 613 270 9990
1
Installation Guide
Installation Steps
1. Mount Illuminator(s) adjacent to camera
2. Mount PSU/ Controller Unit
3. Connect Illuminator(s) to Controller
4. Connect input trigger to controller
(UNIT WILL NOT FUNCTION WITHOUT
APPROPRIATE INPUT TRIGGER)
5. Connect Controller to power
6. Optional network connectivity for trouble shoot or
use by experienced and expert users
Set Up Steps
1. Align illuminator towards scene
2. Adjust vertical angle
3a. Adjust horizontal angle via Adaptive Illumination
(AI) (if required)
3b. Change angle of diffuser if required
4. Tighten all fixings
Eye Safety
EN62471 Risk Group 2: Do NOT stare at the lamps.
Use appropriate protection. Hazardous distance is
1,840mm. Max. Exposure Hazardous Value : 68%
of Risk Group 2 Limit at 200mm from the lamp.
Package Contents
This installation guide provides instructions for installing the PULSESTAR
illuminators & Controller
Golden Rules:
1. Ensure Controller orientation has the cable
glands at the bottom underneath the enclosure
2. Do not input Mains Voltage into Low Voltage
versions
3. Enclosure is fully water tight
4. Ensure there is a trigger input to the controller
PULSESTAR
PULSESTAR illuminator
PSU/ Controller
Spare Lamp Diffuser
Version 1
