background image

SUPPLEMENTAL INSTALLATION AND 

OPERATING INSTRUCTIONS

Catalog No. 1000.58B 

Effective: 06-24-08

Replaces: 02-22-07                  P/N 241295 Rev. 3

Patent No. 6,904,873; Other patent pending

FOR YOUR SAFETY:

Do not store or use gasoline or other flammable vapors and liquids

or other combustible materials in the vicinity of this or any other appliance. To do so may
result in an explosion or fire.

WHAT TO DO IF YOU SMELL GAS:

•   Do not try to light any appliance.
•   Do not touch any electrical switch; do not use any phone in your building.
•   Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's

instructions.

•   If you cannot reach your gas supplier, call the fire department.

Installation and service must be performed by a qualified installer, service agency or the gas
supplier.

This manual should be maintained in legible condition and kept adjacent to the heater or in another safe place for
future reference.

For Hi Delta Models 

302BD–2342BD 

FlexGas™

NOTE: THIS MANUAL IS SUPPLEMENTAL FOR THE FLEXGAS MODELS OF
THE HI DELTA HEATERS. THIS MANUAL ADDRESSES THE SPECIFIC DIF-
FERENCES BETWEEN THESE HEATERS AND STANDARD HI DELTA
MODELS.

Please refer to the standard Installation and Operating Instruction manuals

(Catalogs 1000.501 and 1000.511 as appropriate) for installation requirements which are not
related to the gas supply.

Summary of Contents for FlexGas 302BD-2342BD













Reviews: