background image

PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO 
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT 
YOU FULLY UNDERSTAND AND  COMPREHEND THE FULL CONTENTS OF 
THIS MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO 
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH. 

REV C 12-28-15 

P/N  5900962  

OPERATION AND ASSEMBLY MANUAL

SHIPPING DAMAGE CLAIMS

When this equipment is shipped, title passes 

to the purchaser upon receipt from the carrier. 

Consequently, claims for the material damaged in 

shipment must be made by the purchaser against the 

transportation company at the time shipment is received.

BE SAFE

Ranger™ High Jack Stands are designed and built 

with safety in mind. However, proper training and 

thoughtful operation on the part of the operator can 

increase your overall safety. DO NOT operate or 

repair this equipment without reading this manual 

and the important safety instructions shown inside.

1645 Lemonwood Dr.

Santa Paula, CA. 93060, USA

Tel: 1-805-933-9970

Toll Free: 1-800-253-2363

Fax: 1-805-933-9160

www.rangerproducts.com

HIGH JACK STANDS

Models:  

RJS-1T

RJS-1TF

RJS-2TH

Summary of Contents for RJS-1T









Reviews: