Documentation Center
RAK2247 Quick Start Guide
Prerequisites
What Do You Need?
Before going through each and every step in the installation and guide of the RAK2247 LPWAN Gateway, make
sure to prepare the necessary items listed below:
1. RAK2247 WisLink LPWAN Concentrator
2.
3. A Windows/Mac OS/Linux Computer
What's Included in the Package?
Figure 1: Package Contents
Product Configuration
R x86 Linux PC
This section explains the basic steps on how to interface the RAK2247 WisLink LPWAN Concentrator with a Linux
Operating System in a computer.
1. Insert the RAK2247 mPCIe board into the USB carrier board and plugged into a free USB port of your PC. Your
Linux PC should recognized it as a USB device.
📝
NOTE:
If you want to connect the RAK2247 mPCIe board to the Linux PC directly, make sure to have the
PERST# signal (Pin 22) pulled down.
