![background image](http://html1.mh-extra.com/html/raindrip/r672ct/r672ct_quick-start_782476001.webp)
Install Batteries
(not included)
1. Remove Battery Tray
2. Install Batteries
(2 AAA Alkaline Type)
Program Timer
1. Set
Frequency
[how often] –
Hours (or 1 week)
2.
Set
Run Time
[how long] –
Minutes
NOTE
: Make program dial settings at the hour of the day
you want watering to start. The fi rst watering will begin
X hours later; where X is the
Frequency
hours.
EXAMPLE 1: To water 2 times a day for 30 minutes, set
Frequency
to 12 and
Run Time
to 30. First watering
will occur 12 hours after the dials are set.
EXAMPLE 2: To water 1 time a day for 60 minutes, set
Frequency
to 24 and
Run Time
to 60. First watering
will occur 24 hours after the dials are set.
Attach Timer to Outdoor Faucet
1. Remove Faucet Adapter
2. Attach Adapter to Faucet
3. Attach Timer to Adapter
• Connect your drip system
• Turn water faucet on
Manual Watering
1. To start manual watering, set
Run Time
to ON.
2. To stop watering, set
Run Time
to OFF.
3. When done, set
Run Time
to desired setting.
NOTE: Automatic watering will begin X hours after the
Run Time
dial was set; where X is the
Frequency
hours.
EXAMPLE: You stopped manual watering at 3:00 pm then set
the
Run Time
dial. If
Frequency
is 12, then next watering
will begin 12 hours later (at 3am). If
Frequency
is 24, then next
watering will begin 24 hours later (at 3pm the following day).
Battery Indicator Light
–
Yellow
Good Batteries: Light fashes once every 4 seconds
Weak Batteries: Light fl ashes rapidly or on steady
–
Replace Batteries Promptly
R672CT
Water Timer Quick Start
Install Batteries
Attach Timer to Faucet
Run Time Set to ON
Run Time Set to OFF
Battery Indicator Light
Program Timer: EXAMPLE 1
Program Timer: EXAMPLE 2
Note: If watering is to start at
8:00 am, then make program
settings at the 8:00 pm hour
of the day (12 hours prior).
Note: If watering is to start at
5:00 am, then make program
settings at the 5:00 am hour
of the day (24 hours prior).