background image

©

 2001 RadioShack Corporation. All Rights Reserved.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

OWNER’S MANUAL — Please read before using this equipment.

5W 8 Channel 2-Way Business Band Radio

Your RadioShack 5W 8 Channel 2-
Way Business Band Radio is a porta-
ble, easy-to-use, two-way transceiver
that you can carry almost anywhere. It
is approved with commercial-grade
standards to give you clear, reliable
communication. 

Your transceiver provides personal
communication with family members or
other licensees. You can use the trans-
ceiver for recreational communications
while you hike, ski, or fish. You can
even use the transceiver to coordinate
your activities with other family mem-
bers. When you get a license to oper-
ate the transceiver, other members of

your family living in the same house-
hold can also operate the transceiver.

PLL–Controlled Circuitry — provides
accurate and stable channel selection.

Built-in Modulation Limiter Circuit
 automatically adjusts for a wide va-
riety of voice levels to ensure an un-
derstandable transmission.

LCD Display with Backlight  illumi-
nates for 5 seconds when pressing any
key except 

LOCK/PTT

.

Splash Proof (JIS Level 4)   pro-
vides excellent water resistance.

ˆ

FCC Information

FCC LICENSE 
REQUIRED

This transceiver is intended for use in
the operation of commercial activities,
in educational, philanthropic, or eccle-
siastical institutions, and hospitals,
clinics, or medical associations.

The 

Federal Communications Com-

mission (FCC) requires you to be li-
censed before you operate this
transceiver. Unless you are already li-

censed to operate on one of the preset
frequencies, you must apply for a fre-
quency through the PCIA (Personal
Communication Industry Association),
a non-profit organization that assigns
frequencies nationwide to help prevent
conflicts between different businesses
using transceivers in the same area.
For more information about getting a li-
cense, contact the PCIA at 800-759-
0300, extension 3068 (in Virginia 703-
739-0300, extension 3068).

Summary of Contents for 5W 8 Channel 2-Way Business Band Radio













Reviews: