background image

©

 2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

15-1867

OWNER’S MANUAL — Please read before using this equipment.

Thank you for purchasing the RadioShack Night Light/
Indoor TV Antenna. It can receive both VHF and UHF 
channels, and consists of loop and telescoping antenna 
elements. A 6-foot coaxial cable with a gold plated male F-
connector is attached to the antenna for TV connection. 

219'4+0)

"

6*'

"

#06'00#

Your antenna uses an optional 4.5V DC, 100mA adapter or 
three size C batteries (not supplied, available at your local 
RadioShack store) for illuminating the night light indicator. 
After connecting to power, press 

LIGHT

 to turn the light on or 

off while in darkness.  

.#

.#

.#

.#

±

9

+6*

"

#0

"

#

&#26'4

Plug a 4.5V DC, 100mA adapter into the antenna’s 

DC 4.5V 

jack. Plug the adapter into an AC outlet.

9

+6*

"

$

#66'4+'5

1. Use a screwdriver to loosen the screw from the battery 

compartment cover, and remove the cover.

#

"

+/2146#06

"

#

If an icon appears at the end of a 
paragraph, go to the box on that 
page with the corresponding icon 
for pertinent information.

— Warning 

 

#

 — Important

.

.

.

.

 — Caution 

 

°

°

°

°

 — Hint

±

 — Note

VHF Telescope Rod Antennas — Swivel up 
to 180 degrees for the best VHF reception.

UHF Turntable Knob 
— 
Adjust knobs to 
receive UHF stations in 
most metropolitan 
areas.

UHF Turntable 
Knob

LIGHT — After connecting to 
power, press it to turn the night 
light on or off when in darkness.

TUNING — Adjust to 12 
different settings to fine tune 
VHF channels.

.

"

%#76+10

"

.

If you do not plan to use the 
antenna for several months, 
remove the batteries. Batteries can 
leak chemicals that can destroy 
electronic parts.

±

"

016'

"

±

"

The power from the batteries or 
adapter is only for the night light 
LED. The antenna will work 
without the power for the LED.

The antenna has a light sensor 
circuit that automatically lights if 
you are using an adapter or 
have batteries installed. If you 
press LIGHT while in a dark 
room, the light turns on. When 
the surroundings are bright, the 
light will not turn on when you 
press LIGHT.

0KIJV

"

.KIJV

"1"

+PFQQT

"

68

"

#PVGPPC

Reviews: