Racelogic NTRIP, Quick Start Manual

Page: 1 / 6

03 - NTRIP Modem Connection
The NTRIP Modem can be used with an RTK enabled VBOX or other GNSS receiver, connection is made via
the
bottom Hirose connector .
The baud rate for the serial output of RTCM corrections from the Modem is 115200 kbit/s. To configure this within a
VBOX 3i follow the
instructions below , if you are using another GNSS receiver, you will need to make sure that
the device is configured to communicate at the same rate.
Antenna
Attach the supplied antenna (ANTMSTUBSMAM) to the SMA connector on the top of the unit .
SIM Card
The NTRIP Modem can either use the internal 4G modem via a Standard SIM card or a Wi-Fi connection to acquire the
NTRIP correction messages from the server. If you are intending to use the internal 4G modem, you will need to use
your own data Standard SIM card. Insert this in to the slot on the
top of the unit , with the logo facing the front screen
side/ contact facing the rear, chamfered edge in first .
https://en.racelogic.support//Product_Info/Telemetry_Systems/NTRIP_Modem/NTRIP_Modem_User_Guide/03_-
_NTRIP_Modem_Connection
1