![background image](http://html1.mh-extra.com/html/qubix/2040039/2040039_technical-data-sheet_3564643001.webp)
Product Code :
2040039
Description :
LAN TEST
QUBIX S.p.A. Networking solutions
– Via Canada, 22/A – 35127 Padova – Italy
Tel. +39 049 7801994
– Fax +39 049 775667 –
Rev. 05-12
Qubix S.p.A. si riserva di apportare modifiche e migliorie in qualsiasi momento senza preavviso
Qubix S.p.A. reserves the right to make changes and improvements at any time without notice
Description
LANtest is a handheld tool that allows network professionals to quickly and easily check the integrity of balanced twisted-pair cables and
connections in Ethernet networks. In one step LANtest checks: opens, shorts, reversed pairs, crossed and split pairs in balanced twisted
pair cables. Just put the switch in the On position, press the TEST button and LANtest automatically scans the pairs, looking for mistakes
and failures. The remote unit allows for an accurate verification of the connections in data networks.
Packaging
−
1 Lantest
−
1 LANtest REMOTE
−
Patch cord RJ45-RJ45
−
User manual
−
Protective case
Functionality
•
It checks the nonconformity of cables, jacks, plugs and connections and detects: opens, shorts, crossed pairs, reversed pairs and split
pairs (to identify split pairs it requires a minimum cable length of 40 cm)
•
It checks the integrity of the shielding
•
The remote identifier allows a precise identification of the causes of anomalies
•
Easy to read fault indicator (LED) and very rapid test
•
Auto standby mode to reduce power consumption
Batteries
LANtest runs on 4 AAA alkaline batteries of 1.5 volts. The battery LED will light when it detects the condition of low batteries.
The use of LANtest with low batteries can affect the accuracy of tests. If LANtest
is not used for over a month it’s better to
remove the
batteries.
Recommendations
Do not connect LANtest to active circuits, the 2 units could be damaged. Radio frequency electromagnetic fields of high intensity can
cause erroneous readings. Do not open the two units or try to repair them in case of failures.
In case of malfunction, return the instrument to a local distributor by filling out the type of fault founded.
Pair and shield
LED
TEST botton
Remote unit
Switch ON-=OFF
Fault LED
Battery LED
Qubix SpA