INSTALL AND CONNECT THE ELEMENTS:
1
Feeder and
optional Dynamic Scale (see respective Quick Install Guides),
2
Base,
3
Catch tray.
If included in your system,
CONNECT THE SCALE
(see its
Quick Install Guide).
OPEN THE BASE COVER
,
remove the headset protecting
strips and insert the headset in its compartment, then push
the headset back until it clicks.
WRITE DOWN THE PSD
number, you may need the number
later.
INSTALL THE PSD
in one of the slots and then close the cover.
CONNECT THE SYSTEM POWERPLUG
.
Follow the installation wizard on the screen. Refer to the installation section in the User
Guide.
IS-480/490 QUICK INSTALLATION GUIDE
CAUTION:
use a solid and steady table, far
from any door or fan.
For more information about your mailing
system, please visit:
kb.quadient.us
7
4
8
5
3
6
2
3
1
C
B
C
A
1
Check the box contents.
2
CONNECT THE LAN
to a network RJ45 plug of the Base and
to the LAN wall socket using the LAN cable
B
.
