![background image](http://html1.mh-extra.com/html/pulsar/luxeos-beam-20/luxeos-beam-20_installation-manual_1624649001.webp)
LUXEOS
R
ANGE
P U L S A R
1 Pembroke Avenue, Waterbeach, Cambridge, CB25 9QP
www.pulsarlight.com [email protected] +44 (0) 1223 403 500
1 of 12
INSTALLATION
7650-INST-ALL
L
UX
EOS
Flood
9 - 18 - 36 -
Beam
20 - 40 - 80
LED LUMINAIRES FOR ARCHITECTURAL LIGHTING
Warning
• LuxEOS luminaires must be installed by a qualified electrician.
• Installation must be carried out in accordance with local and/or national
electrical installation codes of practice.
• Isolate the mains supply to the driver during installation and whenever subsequently
disconnecting or reconnecting the fitting to avoid electric shock.
• Use the correct polarity when wiring, if in any doubt please contact Pulsar.
• Pulsar luminaires are designed for lighting applications and must not be used
for any other purpose.
• Unless authorised by Pulsar, field repairs of the luminaire will void the warranty.
MAINS & DATA CONNECTIONS
DMX In
Power In
Qu Cable
- Link -
- Link -
- Link -
- Link -
Power & Data In
- Link -
- Link -
- Link -
- Link -
Qu Cable
Qu Cable
Qu Cable
Qu Cable
Qu Cable
Qu Cable
Qu Cable
Qu Cable
Qu Cable
Typical Connections (Luxeos 9 shown)
LuxCONNECT IP66 Hardwired connection boxes with
separate
Power & DMX wiring & Qu luminaire connections
LuxCONNECT IP66 Hardwired connection boxes with
combined
Power & DMX wiring & Qu luminaire connections