![background image](http://html1.mh-extra.com/html/psion/ikon-ch6020/ikon-ch6020_installation-instruction_1622899001.webp)
Page
1
of
2
Part No. 1081132 Revision D
Installation Instruction Ikôn Handstrap & Tether
A. Handstrap Installation
1.
Assemble Handstrap to Ikôn handheld by looping Velcro tab around pin and adhering to Velcro pad.
2.
Remove bracket and screws from Ikôn.
3.
Slide bracket through Nylon Loop on handstrap and install screws.
Adjust handstrap by pulling up Velcro Tab and readjusting to your hand as needed.
1.
2.
3.