Operating / Safety Instructions
ProtoMachines
www.ProtoMachines.com
Thank you for choosing the ProtoMachines LED8 full color
LED light. It is the result of years of research and
development and represents the cutting edge of full color
LED technology. Please review these instructions carefully
to familiarize yourself with the design and operation of this
device.
SPECIFICATIONS:
Model number:
LED8
Input voltage:
7.4VDC
Input power:
10 watts
Ambient temperature:
32
F - 122
F
(1)
(0
C - 50
C)
Humidity:
85% or less
Weight: 0.85lb
(390g)
Dimensions:
8” x 4” x 2.5” LWH
(203 x 102 x 64mm)
Power source:
2x 18650 li-ion
(protected PCB cells only)
o
Specifications subject to change without notice.
o
Designated trademarks and brands are the property of their respective owners.
1. Duty cycle may be reduced while operating in hot environments.
© 2017
ProtoMachines LLC
All rights reserved.
IMPORTANT SAFETY
INSTRUCTIONS:
WARNING:
When using any battery operated device, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock and personal
injury. Please read this instruction manual carefully and
understand it fully before use.
1.
Keep out of reach of children. This is not a toy.
2. Do not expose device to impacts or strong vibration.
Do not crush. The device may malfunction if damaged.
Remove batteries and discontinue use.
3.
Keep dry. Do not immerse or expose to water. If water
gets inside the device, promptly remove the batteries.
4.
Keep dust and debris away from the controls.
5.
Do not disassemble or modify this device. There are no
user serviceable parts inside.
6. The device may become hot during usage. Avoid
contact with the heatsink. Maintain adequate airflow
around the heatsink at all times.
7.
Not intended for use as the sole source of illumination
in critical survival or hazardous environments. Always
carry a backup light source.
8.
To prevent accidents or excessive battery drain, always
remove the batteries after use, before storage or
transport.
9.
Observe all safety rules and regulations regarding the
handling and transport of lithium ion batteries.
10. If any problem develops, consult your reseller or
ProtoMachines for assistance.
WARNING:
This is powerful LED light source. Always use
common sense when operating this product.
Do not stare directly into the beam.
Do not aim at your eyes, the eyes of other people or
animals. Prolonged exposure may result in injury or
blindness.
Please do not use this product if you do not fully understand
these instructions and warnings.
LIMITED WARRANTY
Before using this product, please read this warranty
carefully. By using your LED8, you agree to the terms and
conditions of this warranty. If you do not accept this
warranty, do not use your LED8. ProtoMachines will not be
liable for any indirect, incidental, or punitive damages arising
from use of this product.
The LED8 is warranted to the original purchaser to be free
from manufacturing and component defects for one (1) year
from the date of purchase. This limited warranty is the sole
and exclusive remedy, offered in lieu of all other warranties,
expressed or implied. ProtoMachines LLC has sole
discretion to determine manufacturer’s defects and will (at its
option) repair or replace it, or refund the purchase price.
Repair may use new or refurbished parts. Replacement may
be with a new or refurbished unit.
This warranty does not cover normal wear and tear, damage
caused by accident, abuse, misuse, modification of the
product, external causes such as acts of nature, or damage
to or from any non-ProtoMachines product used in
conjunction with this product. This warranty is void if the
product is disassembled or used for commercial and/or
rental purposes.
OPERATION
Installing the batteries
The LED8 requires by two (2) 18650 Li-ion PCB protected
batteries capable of at least 3A discharge rate. If unsure,
please consult website or tech support for assistance.
Always use cells of equal capacity and charge level.
Always switch the light off before inserting or removing the
batteries.
1. Slide latch towards the rear and open battery door.
2. Insert two (2) 18650 Li-ion batteries with polarities as
shown.
3. Close the battery door while holding the latch in the open
position.
DO NOT
use excessive force. Latch should
spring back to full-forward position after the door is closed.
Removing the batteries
1. Press and hold the front edge of the battery door to
release the battery latch.
2. Slide battery latch towards the rear to open door.
3. Remove batteries and re-close battery door.
