User manual
LRFS-28C001-W/BK
Solar LED floodlight with PIR sensor
ENG
Uputstvo za upotrebu
User manual
Navodilo za uporabo
LRFS-28C001-W/BK
WARNINGS:
-If product is demaged in delivering process, do not use it.
-Do not stare at LED light source, do not direct it in other people.
-Install floodlight only on normaly flammable surfaces.
-Install floodlight on vertical flat surface. Ideal height for installing
floodlight is 1-3m.
-For installation of solar panel choose places which are illuminated with
sunlight for longest periods of day.
-Do not disassemble this product or make any corrections on it, that will
cause warranty loss.
-Battery replacement or any repairing entrust to authorized person.
-Normal height for installation is 2.5m . In optimal conditions the range of
the beam might reach 12m when temperature of environment is < 24 ° C.
In case that difference in temperature of environment and temperature of
object moving in infra red beam is small, for example in summer
conditions , range of sensor might fall on half . In some cases, hot airflow
might accidentally cause activation, sensor might be activated by hot
engine of vehicle, or larger pets.
Technical specifications:
Floodlight:
Model: LRFS-28C001-W/BK
Power supply: embedded Lithium battery 3,7V DC / 1500 mAh
Charging: solar panel 5V DC / 1W
Power: 5W
Light source: COB LED
Light intensity: 510 lm
Color temperature: day light 6500K
Beam angle: 180°
Power up time: 0.5 s
CRI value: ≤ 70 Ra
Housing: plastic
Operating temperature: -20 ‚ +40 °C
Charging time: ~10h
Operating tim: ~60 minutes
Life span
: ~500 chargings
Floodlight dimensions: 18x 18 x11 cm
Panel dimensions: 20x 19.2x 5 cm
Cord lenght: 5 m
Protection: IP44
Sensor:
Sensor range: 2-12m
Detection angle: 120°
Light sensitivity: 20 – 50000 Lux
Illumination time: 8 s to 2 min
Do not discard with communal waste. At the end of its life,
dispose of product at a facility specializing in the collection of
electronic waste. If you have any question or remark in
connection with this, contact the seller or local waste
management organization. By doing so, you will protect the
environment as well as the health of others and yourself.
Maintance:
Before cleaning floodlight and solar panel, turn off floodlight on switch
and wait till it cools down (minimum 15 minutes). Clean floodlight and
panel with dry cloth, do not use aggressive detergents.
Warning:
Solar panel might reach really high temperatures if it’s exposed to
direct sunlight for a long time. We recommend cleaning in nightly hours, in
order to avoid eventual skin burns.
Before first use of the product read this user manual carefully and save it.
After taking product out of the packaging make sure the product is not
physically damaged in delivering process. If product is damaged, don’t use it.
Part list:
1. Floodlight
2. Solar panel
3. Expansion screw
4. COB LED 5W
5. Battery housing
6. Motion detector
7. Mounting plate
8. ON/OF switch
9. Battery charge inlet
10. Solar panel mounting
bracket
Features:
Solar LED floodlight is perfect choice if there is need for illuminating areas
where it’s not practical to use standard electrical installation. This floodlight
uses the sun light for charging batteries, what makes it pretty economical.
Considering that it is charging by the sun energy, it is meant for outdoors
usage. This floodlight also have a motion sensor, so it might be used as
security solution. Floodlights like this one are usually used on terraces, on
garages, on enterance, even on camping.
1
Installation:
Warning:
Install this product on your own only if
you have read this user manual and if you fully
understand complete described installing process. If
you need help for installing this product, advise with
qualified person.
1. Put holder of LED floodlight on surface which you prefer. For installation of
this device, use the screws which you get with device. Be careful while drilling
holes in the ceiling or wall , do not touch or harm power cable with the
drill.Damaging power cable may cause an accident.
2. Put the solar panel on surface which you prefer, on same way like you
installed LED floodlight.
Warning:
Install solar panel on places which aren’t in shadow at daytime. Choose
places which are illuminated with sunlight for longest periods of the day, for
installing solar panel.
3. Connect plugs of solar panel and LED floodlight.
4. Put floodlight in work by setting power switch in “ON” position.
Warning:
Before first usage of this floodlight it is necessary to perform proper
initial charging of battery. Put the switch in “OFF” position and leave floodlight
exposed to sunlight for three days. After that, floodlight will be ready for first use.
Setting the motion detect sensor:
Setting up the motion detect sensor might be
done by adjusting three knobs which are
located under the sensor (sketch 1).
Knobs are marked with
“SENS“, “TIME“ and “LUX“.
SENS
– adjust the detection range: 2-12m
TIME
– the duration of automatic operation
after movement is detected: 8 s to 2 min
LUX
- adjust the ambient
brightness: : 20 – 50000 Lux
During the day - when the light is not necessary - the floodlight will not
turn on. Sensitivity should be set to based on the brightness of the
environment. Turn the knob in the direction of the moon symbol if you
want the floodlight to turn on only at night, or turn the knob in the
direction of the sun if you want the floodlight to turn on in twilight
already.
