PROAIM P-WV-2PL-SD Instruction Manual Download

Page: 1 / 8

10' Wave-2 Plus Telescopic Jib Arm

Crane with CST-100 Stand &

Portable Dolly

(P-WV-2PL-SD)

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any

means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted

by the applicable copyright statutes or in writing by the publisher.

Summary of Contents for P-WV-2PL-SD

Page 1: ...ights reserved No part of this document may be reproduced stored in a retrieval system or transmitted by any form or by any means electronic mechanical photocopying recording or otherwise except as may be expressly permitted by the applicable copyright statutes or in writing by the publisher ...

Page 4: ...nd on Dolly lock it in place with the rubber grips Adjust riser height of Tripod by loosening lock controls located on each leg slide the stand up to a desired level position and lock leg extensions in place to secure Now attach the central fork with the tripod bowl then attach bottom clamp to secure it well ...

Page 6: ...100 Stand Portable Dolly 6 Loosen the knobs of Jib arm to extend the front telescopic post of the Jib Extend the Jib as per your requirement and tighten all the knobs to secure YOUR PROAIM 10 WAVE 2 PLUS TELESCOPIC JIB ARM CRANE ALL DRESSED UP AND GOOD TO GO ...

Page 7: ...et up onto the bowl plate and lock it with locking adapter Camera Mounting Now mount your camera set up onto fluid head not included and secure it with help of provided knob Attach your LCD Mounting Arm to Jib Fork and tighten it properly to secure Now screw in the LCD to arm and tighten its knob after positioning the angle of LCD Arm LCD Mounting Not Included ...