background image

Contact Toaster – Single-Sided

CTS-W/CTS-M/CTS-WS

CTS-WCE/CTS-MCE/CTS-WSCE

299-

500rev

D

-EN

Printed in USA 03/17 © 2017

Original Instructions

Operation Manual

W - Wire 

Conveyor

WS - Silicone 

Conveyor

M - Metal 

Conveyor

Contact Toaster - Single-Sided

This appliance is designed for toasting bread products in a commercial 
kitchen. Customer-adjustable features include:
• Crush   Adjustment
• Set Temperature
• Toast Time (Speed of Conveyor)
• Scale   (°F   or   C°)
The conveyor belt may be wire, metal (Stainless Steel) or silicon

e

.

 

Silicone belt is consumable to be replaced 

2-6

 months 

dependent on usage 

and is not covered under warranty.

LIMITED WARRANTY

This product is warranted to be free from defects in material and/or 
workmanship for a period of one (1) year from date of original 
installation, not to exceed 18 months from date of shipment from 
our factory. Any part or component which proves to be faulty in 
material and/or workmanship within the warranty period will be 
replaced or repaired (at the option of Prince Castle LLC) without 
cost to the customer for parts or labor.
This warranty is subject to the following exceptions/conditions:
• Use of any non-genuine Prince Castle parts voids this

warranty and all work must be performed by an authorized
Prince Castle Service Agent.

• All labor shall be performed during regular work hours.

Overtime premium will not be covered.

• Travel charges are limited to 100 miles (200 kilometers) round

trip, 2 hours travel time, one trip per repair.

• Damage caused by carelessness, neglect, and/or abuse (e.g., 

using wrong current, dropping, tampering with or altering
electrical components, or improper cleaning) is not covered.

• Equipment damaged in shipment, by fire, flood or an act of

God is not covered.

• Damage to non-stick coated surfaces is not covered by this

warranty.

TABLE OF CONTENTS

Safety Information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

2

Electrical Specifications   . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

2

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

2

Operation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

4

Setting Adjustments   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

6

Daily Planned Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 

7

Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

9

Uninstalling and Installing the Silicon

e

 Belt . . . . . . . . . . . . . . 10

Service Kits  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  11

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12

Wiring Diagram  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  13

Revision Log  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

355 East Kehoe Blvd. • Carol Stream, IL 60188 USA

Telephone: 630-462-8800 • Toll Free: 1-800-PCASTLE

Fax: 630-462-1460 • www.princecastle.com

TM

Summary of Contents for CTS-M
















Reviews: