background image

128-9313

1 of 16 

Page 1

PATENTED:  www.voxxintl.com/company/patents

Model APS-510E

5 Button Remote Security System

with Dual Stage Shock Sensor

Owners Guide

FCC COMPLIANCE

This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including any interference that may cause undesired operation.

Warning!

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority 

to operate the equipment

NOTE:  The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this 

equipment. Such modifications could void the user’s authority to operate the 

equipment.

Table Of Contents:

Features and Options  

Page 2

About Your "Code Hopping" Transmitters 

Page 3

Arming Your System 

Page 3 - 4

Protection While The System Is Armed 

Page 4 - 5

Disarming Your System 

Page 5 - 6

While The System Is Sounding 

Page 6

Intrusion Warning Signals 

Page 6 - 7

Push Button LED/Valet/Override/Programming Switch 

Page 7

Manually Overriding Your System 

Page 7 - 8

Programming Your Custom Override Code 

Page 8 - 9

Using The Custom Code Override 

Page 10

Eliminating the Normal Arm/Disarm Chirps 

Page 10

Remote Panic Operation 

Page 10 - 11

Additional Remote Function (Channel 3) 

Page 11 - 12

Ignition Controlled Lock/Unlock 

Page 12

Telematic Upgrade 

Page 12

Programming New or Replacement Transmitters 

Page 13

Transmitter Battery Replacement 

Page 15

System Functions At A Glance 

Page 16

Summary of Contents for APS-510E

















Reviews: