Vintage RV Spinner
assembly
instructions
B
Step 1
The Strut Assembly of your Vintage RV spinner is shipped in two sections. The Front Strut Assembly comes already inserted into the RV
Body Sleeve. There is also a Stiffener Rod within the Sleeve. Open the Velcro seam on the RV Body Sleeve and connect the Front Strut
Assembly to the Stiffener Rod. (diagram A)
Step 2
Insert the Rear Strut Assembly into the Body Sleeve and connect to the Front Strut Assembly. (Diagram B)
Completed Internal Strut Assembly.
Make sure all parts connect as shown.
Internal Strut Assembly
will have to be connected
to Internal Stiffener
WindGarden
b y p r e m i e r d e s i g n s
w w w . p r e m i e r k i t e s . c o m
sku #26827
Body Sleeve
Body Sleeve
Front Strut Assembly
(Internal Body
Struts)
Front Strut Assembly
(Internal Body Struts)
Rear Strut Assembly
will have to be
connected to
Internal Body Struts
A
Stiffener
Rod
Velcro
Seam
Plastic Tip of Support Pole
Support Pole
Push Star Lock Hub firmly
onto Plastic Tip of Support Pole
NOTE: To make insertion process
easier, place bottom of Support Pole
on a hard, flat surface and push
down on Star Lock Hub.
Star Lock Hub
